Articles
Determination of the stability of a three-layer shell of a traveling wheel with light filler
/ 0
- Details
- Category: Content №2 2022
- Last Updated on 30 April 2022
- Published on 30 November -0001
- Hits: 4527
Authors:
N.M.Fidrovska, orcid.org/0000-0002-5248-273X, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Ye.D.Slepuzhnikov, orcid.org/0000-0002-5449-3512, National University of Civil Defence of Ukraine, Kharkiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
V.O.Shevchenko, orcid.org/0000-0001-8707-1837, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
D.V.Legeyda, orcid.org/0000-0002-8983-0822, National University of Construction and Architecture, Kharkiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
S.V.Vasyliev, orcid.org/0000-0002-6602-8765, National University of Civil Defence of Ukraine, Kharkiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2022, (2): 037 - 041
https://doi.org/10.33271/nvngu/2022-2/037
Abstract:
Purpose. Development of a calculation methodology for three-layer cylindrical shell stability, which will significantly improve the calculation practice for these structures regarding the determination of critical external pressure.
Methodology. When determining the critical external pressure, the method of variational calculation using the Euler equation of the mixed variational problem was used. To determine three-layer cylindrical shell stability, the factors of significant influence on its strength and stability were taken into consideration, namely the reduced modulus of a three-layer wall elasticity. Bending stiffness Dh was substituted with flexural stiffness of three-layer shell with account for the shear deformation.
Findings. The current situation of the three-layer cylindrical shell stability issue is investigated. Using the variational calculation methods via the Euler equation of the mixed variational problem an equation is composed of equality condition of inner and external force action of an orthotropic structure, which is under the state of neutral equilibrium with radial displacement. The previously obtained equation for radial displacements having been taken and applied to the system potential energy per unit of length equation, an equation for the critical pressure determination is determined. The analytical solution obtained was proposed for the structure of the crane travelling wheel with an elastic insert. Pcr 1267MPa was obtained. The allowable wheel pressure on rail for the crane travelling wheels is adopted to be within 250 MPa, i.e. the available stability margin is nc 1267/250 5.1. As we can see, the stability margin is more than sufficient.
Originality. A new methodology for the three-layer cylindrical shell under external pressure calculation is developed. A quantitative assessment of the crane travelling wheel with flexible insert critical pressure is carried out.
Practical value. A determination methodology for critical pressure of a three-layer cylindrical structure under external pressure is created.
Keywords: three-layer shell, external pressure, elasticity modulus, critical pressure, stability, travelling wheel
References.
1. Pavliuk, A.V. (2017). Dynamics of three-layer cylindrical shells elliptical cross-sectionwith a longitudinal-transverse discrete ribbed filler. Physics and Chemistry of Solid State, 18(2), 243-248. https://doi.org/10.15330/pcss.18.2.243-248.
2. Ghamkhar, M., Naeem, M., Imran, M., & Soutis, C. (2019). Vibration analysis of a three-layered FGM cylindrical shell including the effect of ring support. Open Physics, 17(1), 587-600. https://doi.org/10.1515/phys-2019-0060.
3. Kairov, O.S., Vlasov, O.I., & Latanska, L.O. (2017). Natural vibrations of structurally inhomogeneous multilayer orthotropic cylindrical shells made of composite materials. Visnyk Zaporizkoho Natsionalnoho Universytetu. Fizyko-matematychni nauky, (2), 57-65.
4. Larin, O., Morozov, ., Nazarenko, S., Chernobay, G., Kalynovskyi, A., Kovalenko, R., , & Pustovoitov, P. (2019). Determining mechanical properties of a pressure fire hose the type of T. Eastern-European Journal of Enterprise Technologies, 6/7(102), 63-70. https://doi.org/10.15587/1729-4061.2019.184645.
5. Otrosh, Y., Kovalov, A., Semkiv, O., Rudeshko, I., & Diven, V. (2018). Methodology remaining life time determination of the buildingstructures. MATEC Web of Conferences, 230, 1-7. https://doi.org/10.1051/matecconf/201823002023.
6. Mohamed, Ali J., Alsubari, S., & Aminanda, Y. (2016). Hygrothermoelastic analysis of orthotropic cylindrical shells. Latin American Journal of Solids and Structures, 13, 573-589. https://doi.org/10.1590/1679-78252249.
7. Surianinov, M., Yemelianova, T., & Lazarieva, D. (2018). Analytical and computer research of stability of three layer shells, supported by stiffness ribs. International Journal of Engineering & Technology, 7(4), 6797-6800. https://doi.org/10.14419/ijet. v7i4.24672.
8. Shah, A., Ali, A., Naeem, M., & Arshad, S. (2012). Vibrations of three-layered cylindrical shells with FGM middle layer resting on Winkler and Pasternak foundations. Advances in Acoustics and Vibration, 2012, 1-11. https://doi.org/10.1155/2012/507031.
9. Leonenko, D.V., & Starovoitov, E.I. (2015). Impulsive action on the three-layered circular cylindrical shells in elastic media. Izvestia Saratov University, 15(2), 202-209. https://doi.org/10.18500/1816-9791-2015-15-2-202-209.
10. Fidrovska, N.M., Slepuzhnikov, E.D., & Perevoznyk, I.A. (2019). Determining the strength of a three-layer cylindrical shell. Mashynobuduvannia, 24, 17-23. https://doi.org/10.32820/2079-1747-2019-24-17-23.
11. Isvandzibaei, M., Jamaluddin, H., & Hamzah, R. (2013). Effects of ring support and internal pressure on the vibration behavior of multiple layered cylindrical shells. Advances in Mechanical Engineering, 2013, 1-13. https://doi.org/10.1155/2013/791917.
12. Ghamkhar, M., Naeem, M., Imran, M., Kamran, M., & Soutis,C. (2019). Vibration frequency analysis of three-layered cylinder shaped shell with effect of FGM central layer thickness. Scientific Reports, 9, 1-13. https://doi.org/10.1038/s41598-018-38122-0.
13. Dubrovin, V.M., & Butina, T.A. (2014). Modeling the dynamic stability of a cylindrical shell under the action of external overpressure. Nauka i innovatsii, 6, 1-14. https://doi.org/10.18698/2308-6033-2014-6-1237.
14. Chepurnenko, A.S., Yazyiev, B.M., & Lapina, A.P. (2018). alculation of a three-layer cylindrical shell taking into account the creep. Stroitelstvo i arhitektura, 4(21), 14-18. https://doi.org/10.29039/article_5c35ed650 acfc0.48169070.
15. Fidrovska, N.M., Slepuzhnikov, E.D., Larin, O.O., Varchenko,I.S., Lipovyi, V.O., Afanasenko, K.A., & Harbuz, S.V. (2020). Increase of operating reliability of the travel wheel using the use of the elastic inserts. EUREKA: Physics and Engineering, 5(30), 69-79. https://doi.org/10.21303/2461-4262.2020.001387.
16. Fidrovska, N.M., Slepuzhnikov, E.D., Varchenko, I.S., Harbuz,S.V., Shevchenko, S.M., Chyrkina, M.A., & Nesterenko, V.V. (2021). Determining stresses in the metallic structure of an overhead crane when using running wheels of the new design. Eastern-European Journal of Enterprise Technologies, 1/7(109), 22-31. https://doi.org/ 10.15587/1729-4061.2021.225097.
Newer news items:
- Research into the properties of poured asphalt from electric furnace slag aggregate - 30/04/2022 13:42
- Improvement of concrete and building mortar technology using secondary mineral resources - 30/04/2022 13:41
- Research on chemical composition of secondary copper anodes obtained from aqueous residues of refining process - 30/04/2022 13:41
- Geological and economic risk assessment for territories of hazardous geological and technogenic processes (exemplified by Solotvyno township) - 30/04/2022 13:41
- Information and analytical support for making well-informed administrative decisions in civil protection system - 30/04/2022 13:41
- Accounting the factor of randomity of social processes in prediction of demand for electric energy - 30/04/2022 13:41
- Electromechanical system of turbomechanism when using an alternative source of electric energy - 30/04/2022 13:41
- A new approach to improving the sensitivity of earthing relay and reducing the over-voltage in 6 kV grid of open-pit mines - 30/04/2022 13:41
- Thermodynamics of the developing contact heating of a process liquid - 30/04/2022 13:41
- Establishment of a suitable reference system for the geodetic horizontal control network in hydroelectric construction in Viet Nam - 30/04/2022 13:41
Older news items:
- Spatial control over ultrasonic cleaning of mining equipment using a phased array technology - 30/04/2022 13:41
- Treatment of formation water at oil fields using granular filters with varying particle sizes - 30/04/2022 13:41
- Research into heap leaching technology of gold-bearing ores at the Vasilkovsky gold ore deposit (Kazakhstan) - 30/04/2022 13:41
- On the possible role of magmatism in the atasu type strathiform mineralization (Central Kazakhstan) - 30/04/2022 13:41
- On the material of the cromlech-crepidoma stone blocks of the Novooleksandrivka kurgan - 30/04/2022 13:41