Load of the wagon-platform for transportation of bulk cargoes
- Details
- Category: Content №5 2022
- Last Updated on 30 October 2022
- Published on 30 November -0001
- Hits: 2400
Authors:
O.V.Fomin, orcid.org/0000-0003-2387-9946, State University of Infrastructure and Technologies, Kyiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
A.O.Lovska, orcid.org/0000-0002-8604-1764, Ukrainian State University of Railway Transport, Kharkiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
A.M.Fomina, orcid.org/0000-0002-9810-8997, Volodymyr Dahl East Ukrainian National University, Sievierodonetsk, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
S.M.Turpak, orcid.org/0000-0003-3200-8448, Zaporizhzhia Polytechnic National University, Zaporizhzhia, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
S.V.Hrytsai, orcid.org/0000-0001-7055-6977, Zaporizhzhia Polytechnic National University, Zaporizhzhia, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2022, (5): 054 - 059
https://doi.org/10.33271/nvngu/2022-5/054
Abstract:
Purpose. To substantiate the improvement of the load-bearing element of the wagon-platform for the possibility of transporting bulk cargoes.
Methodology. In order to be able to transport bulk cargo on the wagon-platform, it is proposed to install a composite boiler module on it. In order to determine the dynamic load of the improved load-bearing structure of the wagon-platform, mathematical modeling was performed. The mathematical model formed by professor Bohomaz H.I. was used. However, within the framework of the research this model was refined to determine the load of the wagon-platform of the proposed design. The solution of the system of differential equations is carried out in the MathCad software package. To do this, the mathematical model was reduced to the normal Cauchy form, and then integrated by the Runge-Kutta method. The obtained acceleration is taken into account when calculating the strength of the advanced load-bearing structure of the wagon-platform. The calculation is performed in the SolidWorks Simulation software package, which implements the finite element method. Also, within the research the modal analysis of a load-bearing structure of the wagon-platform is carried out.
Findings. Based on the calculations, it is established that the acceleration acting on the load-bearing structure of the wagon-platform car is 0.38 g, i.e. it is within acceptable limits. The results of the calculation of the strength of the improved design of the wagon-platform showed that the maximum equivalent stresses occur in the area of interaction of the spine beam frame with the pivot and is about 340 MPa, the maximum displacement made 8.6 mm. That is, the obtained stresses do not exceed the yield strength of the structural material. The results of the modal analysis showed that the values of the natural frequencies of oscillations are within acceptable limits, because the first natural frequency has a value greater than 8 Hz.
Originality. The scientific substantiation of improvement of a load-bearing structure of a universal wagon-platform to transportations of bulk cargoes is carried out.
Practical value. The conducted research will promote increase in efficiency of operation of railway transport and creation of developments concerning planning of innovative designs of a rolling stock.
Keywords: transport mechanics, wagon-platform, dynamic loading, strength, load modeling, modal analysis
References.
1. Chuan-jin, O.U., & Bing-tao, L.I. (2020). Research and application of new multimodal transport equipment-swap bodies in China. E3S Web of Conferences, 145, 02001. https://doi.org/10.1051/e3sconf/202014502001.
2. Okorokov, A., Fomin, O., Lovska, A., Vernigora, R., Zhuravel, I., & Fomin, V. (2018). Research into a possibility to prolong the time of operation of universal open top wagon bodies that have exhausted their standard resource. Eastern-European Journal of Enterprise Technologies, 3(7(93)), 20-26. https://doi.org/10.15587/1729-4061.2018.131309.
3. Street, G.E., Mistry, P.J., & Johnson, M.S. (2021). Impact Resistance of Fibre Reinforced Composite Railway Freight Tank Wagons. Journal of Composites Science, 5(6), 152. https://doi.org/10.3390/jcs5060152.
4. Zaynitdinov, O.I., Ruzmetov, Y.O., Rustam, R., & Waail, M.L. (2020). Development of new polymer composite materials for the flooring of rail carriage. International Journal of Engineering and Technology, 9(2), 378-381.
5. Ibrahima, I.D., Jamirua, T., Sadikub, E.R., Kupolatic, W.K., Mpofud, K., Ezea, A.A., & Uwa, C.A. (2019). Production and Application of Advanced Composite Materials in Rail Cars Development: Prospect in South African Industry. Procedia Manufacturing, 35, 471-476.
6. Paczek, M., Wrbel, A., & Olesiejuk, M. (2017). Modelling and arrangement of composite panels in modernized freight cars. MATEC Web of Conferences, 112, 06022. https://doi.org/10.1051/matecconf/201711206022.
7. Silva, R., Ribeiro, D., Bragana, C., Costa, C., Arde, A., & Calada, R. (2021). Model Updating of a FreightWagon Based on Dynamic Tests under Different Loading Scenarios. Applied Science, 11, 10691. https://doi.org/10.3390/app112210691.
8. Patrascu, A.I., Hadar, A., & Pastrama, S.D. (2020). Structural Analysis of a Freight Wagon with Composite Walls. MATERIALE PLASTICE, 57(2), 140-151. https://doi.org/10.37358/MP.20.2.5360.
9. Krol, O., & Sokolov, V. (2020). Modeling of Spindle Node Dynamics Using the Spectral Analysis Method. Lecture Notes in Mechanical Engineering, 1, 35-44. https://doi.org/10.1007/978-3-030-50794-7_4.
10. Krol, O., Porkuian, O., Sokolov, V., & Tsankov, P. (2019). Vibration stability of spindle nodes in the zone of tool equipment optimal parameters. Comptes rendus de lAcademie bulgare des Sciences, 72(11), 1546-1556. https://doi.org/10.7546/CRABS.2019.11.12.
11. Tkachenko, V., Sapronova, S., Kulbovskiy, I., & Fomin, O. (2017). Research into resistance to the motion of railroad undercarriages related to directing the wheelsets by a rail track. Eastern-European Journal of Enterprise Technologies, 5(7(89)), 65-72. https://doi.org/10.15587/1729-4061.2017.109791.
12. Turpak, S.M., Taran, I.O., Fomin, O.V., & Tretiak, O.O. (2018). Logistic technology to deliver raw material for metallurgical production. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (1), 162-169. https://doi.org/10.29202/nvngu/2018-1/3.
13. Freight wagons. General requirements for calculations and design of new and modernized wagons of 1520 mm gauge (non-self-propelled). DSTU 7598:2014 (2015). Retrieved from http://online.budstandart.com/ua/catalog/doc-page.html?id_doc=73763.
14. Alieinykov, I., Thamer, K.A., Zhuravskyi, Y., Sova, O., Smirnova,N., Zhyvotovskyi, R., , & Shyshatskyi, A. (2019). Development of a method of fuzzy evaluation of information and analytical support of strategic management. Eastern-European Journal of Enterprise Technologies, 6(2(102)), 16-27. https://doi.org/10.15587/1729-4061.2019.184394.
15. Fomin, O., Lovska, A., Masliyev, V., Tsymbaliuk, A., & Burlutski,O. (2019). Determining strength indicators for the bearing structure of a covered wagon's body made from round pipes when transported by a railroad ferry. Eastern-European Journal of Enterprise Technologies, 1(7(97)), 33-40. https://doi.org/10.15587/1729-4061.2019.154282.
16.Kondratiev, A. (2019). Improving the mass efficiency of a composite launch vehicle head fairing with a sandwich structure. Eastern-European Journal of Enterprise Technologies, 6(7(102)), 6-18. https://doi.org/10.15587/1729-4061.2019.184551.
17. Kondratiev, A., Gaidachuk, V., Nabokina, T., & Kovalenko, V. (2019). Determination of the influence of deflections in the thickness of a composite material on its physical and mechanical properties with a local damage to its wholeness. Eastern-European Journal of Enterprise Technologies, 4(1(100)), 6-13. https://doi.org/10.15587/1729-4061.2019.174025.
18. Fantuzzia, N., Bacciocchiab, M., Benedettic, D., & Agnelli, J. (2021). The use of sustainable composites for the manufacturing of electric cars. Composites Part C, 4, 100096. https://doi.org/10.1016/j.jcomc.2020.100096.
19. Vatulia, G., Komagorova, S., & Pavliuchenkov, M. (2018). Optimization of the truss beam. Verification of the calculation results. MATEC Web of Conferences, 230, 02037. https://doi.org/10.1051/matecconf/201823002037.
20. Vatulia, G.L., Lobiak, O.V., Deryzemlia, S.V., Verevicheva,M.A., & Orel, Ye.F. (2019). Rationalization of cross-sections of the composite reinforced concrete span structure of bridges with a monolithic reinforced concrete roadway slab. IOP Conference Series: Materials Science and Engineering, 664, 012014. https://doi.org/10.1088/1757-899X/664/1/012014.
Newer news items:
- Dichotomy of legal provision of ecological safety in excavation, extraction and use of coal mine methane - 30/10/2022 01:53
- Planning models of sanitary protection zones around mode-forming objects - 30/10/2022 01:53
- Criminal liability for illegal mining: analysis of legislative novelties - 30/10/2022 01:53
- Legal security of environmental safety under the conditions of marital state in Ukraine - 30/10/2022 01:53
- A risk of pulmonary diseases in miners while using dust respirators - 30/10/2022 01:53
- Problems of development of innovative power supply systems of Ukraine in the context of European integration - 30/10/2022 01:53
- Estimation and forecasting of carbon dioxide emissions from coal-fired thermal power plants in Ukraine - 30/10/2022 01:53
- Mathematical simulation of autonomous wind electric installation with magnetoelectric generator - 30/10/2022 01:53
- Experimental evaluation of fire hazard of lithium-ion battery during its mechanical damage - 30/10/2022 01:53
- Substantiating the methods for calculating the split cylindrical drums of mine hoisting machines with increased rope capacity - 30/10/2022 01:53
Older news items:
- Impact of weak electromagnetic fields on the properties of coal substance - 30/10/2022 01:53
- Use of natural phosphate wastes in the manufacture of construction bricks - 30/10/2022 01:53
- Forecasting the technical efficiency of mobile workover rigs - 30/10/2022 01:53
- Substantiation of the optimal parameters of the bench elements and slopes of iron ore pits - 30/10/2022 01:53
- Peculiarities of drilling hard rocks using hydraulic shock technology - 30/10/2022 01:53
- Phenomena and mechanism of slagging and corrosion in energy use of coal with a high content of salts - 30/10/2022 01:53
- On the earliest evidence of the middle Dnipro area non-flint rocks use - 30/10/2022 01:53