Substantiation of parameters of tamping mechanism оf tamping vibratory plant

User Rating:  / 0
PoorBest 

Authors:  

V.Z. Dyatchin, Candidate of Technical Sciences, State Enterprise «Ukrainian Scientific R&D Institute of Industrial Technology», Senior Research Fellow of Scientific and Research Department, Zheltyye Vody, Ukraine

R.V. Shumeyko, State Enterprise «Ukrainian Scientific R&D Institute of Industrial Technology», engineer of II category of Scientific and Research Department, Zheltyye Vody, Ukraine

Annotation:

Analytical research of tamping mechanism of the existent tamping vibratory plants was conducted and failings of the mechanism are determined. A new mathematical model of tamping process is proposed. It is established that efficiency of the plant’s work depends not only on the form of the profiled guide surfaces of ballast-tampers but also on deflecting roller location relative to the axis of rotation of ballast-tamper. A method of tamping mechanism improvement is proposed that will allow increasing the tamping vibratory plant efficiency.

References:

1. Вибродоставочные комплексы в технологиях разработки рудных месторождений / [Потураев В.Н., Дырда В.И., Поддубный И.К. и др.]; под ред. В.И. Белоброва. - К.: Наук. думка, 1989. - 167 с.

Complexes of vibrating delivery in ore deposits development technologies / [Poturayev V.N., Dyrda V.I., Poddubnyy I.K. et al.]; edited by V.I. Belobrov. - К.: Nauk. dumka, 1989. – 167 p.

2. Ляшенко В.И. Механизация вспомогательных процессов на уранодобывающих рудниках Украины / В.И. Ляшенко, В.З. Дятчин, А.Г. Скотаренко // Науковий вісник НГУ. – 2008. – №7. – С. 28–31.

Lyashenko V.I. Mechanization of auxiliary processes on mines of Ukraine extracting uranium / V.I. Lyashenko, V.Z. Dyatchin, A.G. Skotarenko // Naukovyi visnyk NGU. – 2008. – No.7. – P. 28–31.

3. Ляшенко В.И. Развитие технических средств для горнорудной и металлургической промышленности / В.И. Ляшенко, В.З. Дятчин, Д.В. Дятчин // Науковий вісник НГУ.– 2008. – №9. – С. 85–95.

Lyachenko V.I. Development of technical means for mining and metallurgical industry / V.I. Lyachenko, V.Z. Dyatchin, D.V. Dyatchin // Naukovyi visnyk NGU. – 2008. – No.9. – P. 85–95.

Files:
2011_05_diatch
Date 2012-11-27 Filesize 423.57 KB Download 1517

Visitors

7350938
Today
This Month
All days
213
40441
7350938

Guest Book

If you have questions, comments or suggestions, you can write them in our "Guest Book"

Registration data

ISSN (print) 2071-2227,
ISSN (online) 2223-2362.
Journal was registered by Ministry of Justice of Ukraine.
Registration number КВ No.17742-6592PR dated April 27, 2011.

Contacts

D.Yavornytskyi ave.,19, pavilion 3, room 24-а, Dnipro, 49005
Tel.: +38 (056) 746 32 79.
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
You are here: Home Archive by issue 2011 Contents No.5 2011 Geotechnical and mining mechanical engineering, machine building Substantiation of parameters of tamping mechanism оf tamping vibratory plant