Influence of the protective potential distribution of a steel underground pipeline on electrochemical corrosion processes
/ 0
- Details
- Category: Content №2 2025
- Last Updated on 26 April 2025
- Published on 30 November -0001
- Hits: 1758
Authors:
O.O.Aziukovskyi*, orcid.org/0000-0003-1901-4333, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
H.H.Pivniak, orcid.org/0000-0002-8462-2995, Dnipro University of Technology, Dnipro, Ukraine
M.V.Babenko, orcid.org/0000-0003-2309-0291, Dnipro University of Technology, Dnipro, Ukraine
S.K.Shykhov, orcid.org/0009-0000-9459-9277, Dnipro University of Technology, Dnipro, Ukraine
* Corresponding author e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2025, (2): 155 - 163
https://doi.org/10.33271/nvngu/2025-2/155
Abstract:
Purpose. To distinguish the influence of inserts, with high resistance to the flow of electric current, which causes deviations of the protective potential along the length of the pipeline from its classical form. Obtaining analytical dependencies in the form of a transfer function that relates the input and output signal. That allows predicting dangerous deviations of the protective potential, the combination of which indicates a worsening of corrosion protection.
Methodology. To achieve this purpose, the methods of theoretical analysis, mathematical and computer modeling, and spectral analysis of signals are used. The initial information characterizing the operating modes of adjacent cathode stations is obtained and verified based on the data from monitoring the protective potential along the tracks of underground steel pipelines of various designs. The parameters taken into account in the calculations include the geometric dimensions of the pipeline, soil condition, insulation resistance, etc. By analyzing the results of measurements obtained with the help of a recording voltmeter “PRIMA 2000” and a detector “Sprut-17”, the growth of corrosion risks arising from the repair of a damaged section of an underground steel pipeline using polyethylene pipes is established and analyzed in detail.
Findings. A modeling of the operating modes of adjacent cathodic protection stations, between which there is a section of polyethylene pipeline, with the electrical parameters of an underground steel pipeline is performed. Based on the information obtained, attention is drawn to possible rational energy operation modes of adjacent cathodic protection stations, the main task of which is to reduce the corrosive effects of the polyethylene section of the underground pipeline.
Originality. The paper is to substantiate the possibility of such a negative impact of a polyethylene insert in a steel pipeline, which increases the corrosion hazard. The dependence is obtained of the protective potential of cathodic protection stations in sections of the pipeline with polyethylene inserts from the operating modes of the electrical system with energy converters and their voltage generation algorithms at the output of cathodic protection stations.
Practical value. The paper analyzes the signals of rectifiers of cathodic protection stations and power switches commutation modes that are aimed at improvement of the complex corrosion situation on low and medium pressure pipelines, which are characterized by heterogeneity of structure, especially within populated areas. The proposed modes of operation of adjacent cathodic protection stations reduce the level of corrosion hazard caused by the massive introduction of polyethylene pipes and their widespread use for repairing damaged sections of steel pipelines.
Keywords: underground steel pipeline, cathodic protection, electrochemical corrosion, electrical parameters of the pipeline
References.
1. GTS Operator of Ukraine LLC (2020). Gas transmission system development plan for 2021–2030. Kyiv. Retrieved from https://tsoua.com/wp-content/uploads/2020/10/TYNDP-2021-2030-TSO-4.1.pdf
2. Length and ownership structure of gas distribution systems (2021). Retrieved from https://map.ua-energy.org/uk/resources/8ff9aac6-34e1-4932-ae4f-97f3896aed29/?_ga=2.244269381.1360191742.1718703785-274564711.1718703058
3. Pivniak, G., Aziukovskyi, O., Papaika, Yu., Lutsenko, I., & Neuberger, N. (2022). Problems of development of innovative power supply systems of Ukraine in the context of European integration. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (5), 89-103. https://doi.org/10.33271/nvngu/2022-5/089
4. Overview of the main reasons for the critical state of Ukraine’s gas distribution system in the face of growing challenges (2021). Retrieved from https://razumkov.org.ua/statti/ogliad-osnovnykh-prychyn-krytychnogo-stanu-gazorozpodilnoi-systemy-ukrainy-v-umovakh-zrostaiuchykh-vyklykiv
5. DBN V.2.5-20:2018 (2019). Hazopostachannia. Kyiv: Ministry of Regional Development, Construction, Housing and Communal Services of Ukraine. Retrieved from https://e-construction.gov.ua/laws_detail/3200377925350196674?doc_type=2
6. Kodex 2:2021 (2022). Gas Distribution Systems. Recommendations for the design, construction, construction supervision, commissioning and decommissioning of gas distribution systems. Kyiv: SE “UkrNDNC”. Retrieved from https://grmu.com.ua/wp-content/uploads/2023/04/Кодекс-усталеної-практики-України.pdf
7. DSTU B V.2.5-29:2006 (2006). General requirements for corrosion protection. Underground steel gas pipelines. Kyiv: MINBUD UKRAINY. Retrieved from https://dbn.co.ua/load/normativy/dstu/dstu_b_v_2_5_29/5-1-0-1765
8. Azyukovskyi, O. (2013). Formation of protective potential of an underground steel pipeline by a high-frequency inverter rectifier. Hirnycha elektromekhanika ta avtomatyka: nauk.-tekhn. zb., 91, 37-41.
9. Aziukovskyi, O. (2013). The electrochemical cathodic protection stations of underground metal pipelines in uncoordinated operation mode. Energy Efficiency Improvement of Geotechnical Systems – Proceedings of the International Forum on Energy Efficiency, 47-55. https://doi.org/10.1201/b16355-7
10. DSTU EN 1594:2019 (2019). Gas infrastructure. Pipelines with a maximum operating pressure of over 16 bar. Functional requirements. Kyiv: SE “UkrNDNC”. Retrieved from https://zakon.rada.gov.ua/rada/show/v0433774-19#Text
11. Pivnyak, G., Rogoza, M., Papaika, Y., & Lysenko, A. (2015). Traction and energy characteristics of no-contact electric mining locomotives with AC current thyristor converters. Power Engineering, Control and Information Technologies in Geotechnical Systems, 1-6. https://doi.org/10.1201/b18475-1
12. Mukhlynin, S. M. (2012). Development of a dual-frequency measurement method for monitoring the state of insulation of pipelines located in wet soils and underwater. Metody ta prylady kontroliu yakosti, (1), 16-25.
13. Vashchyshak, I. R., Vashchyshak, S. P., Tsykh, V. S., & Yavorskyi, A. V. (2015). Comprehensive inspection of underground oil and gas pipelines. Naukovi Pratsi VNTU, (1).
14. Mujezinovic, A., & Turkovic, I. (2017). Review on cathodic protection system modelling. B&H Electrical Engineering, 11, 81-91.
15. A. Al Habobi, N., & F. Abed, S. (2013). Simulation of Cathodic Protection System Using Matlab. Iraqi Journal of Chemical and Petroleum Engineering, 14(1), 25-37. https://doi.org/10.31699/IJCPE.2013.1.3
16. Oghli, H. M., Akhbari, M., Kalaki, A., & Eskandarzade, M. (2020). Design and analysis of the cathodic protection system of oil and gas pipelines, using distributed equivalent circuit model. Journal of Natural Gas Science and Engineering, (84), 103701. https://doi.org/10.1016/j.jngse.2020.103701
17. Kosobudzki, G., Rogoza, M., Lysenko, O., & Papaika, Yu. (2018). Frequency and Parametric Characteristics of Direct Current Pulse Conversion Filter of a Contactless Locomotive. 14 th Selected Issues of Electrical Engineering and Electronics (WZEE), 1-4. https://doi.org/10.1109/WZEE.2018.8748987
18. Shcherba, A. A., Suprunovska, N. I., & Shcherba, M. A. (2022). Features of the formation of multi-channel pulse currents and fast-migrating electric sparks in the layer of current-conducting granules of electric-discharge installations. Tekhnichna Elektrodynamika, (2), 3-9. https://doi.org/10.15407/techned2022.02.003
19. Shcherba, A. A., Suprunovska, N. I., & Ivashchenko, D. S. (2018). Probabilistic properties of electrical characteristics of capacitor charge circuit with stochastic active resistance. Tekhnichna Elektrodynamika, (6), 14-17. https://doi.org/10.15407/techned2018.06.014
Newer news items:
- Confirmatory factor analysis of management system standards using first & second-order analysis - 26/04/2025 20:53
- Formation of value orientations of the personality of a higher education student in the economic field using the Ukrainian language - 26/04/2025 20:53
- Modeling obstacle avoidance strategies in UAV groups - 26/04/2025 20:53
- Development of a multipurpose geographic database for urban infrastructure management in Ho Chi Minh city (Vietnam) - 26/04/2025 20:53
- Discrete perceptron based on probabilistic estimates of shifted synaptic signals - 26/04/2025 20:53
- Dialogue with generative artificial intelligence: is its “product” free from academic integrity violations? - 26/04/2025 20:53
- The right to decent, safe and healthy working conditions: organizational and legal guarantees of its provision in Ukraine - 26/04/2025 20:53
- Environmental management: assessing the reliability of ecosystems to ensure their environmental sustainability - 26/04/2025 20:53
Older news items:
- Implementation of a computational experiment for shock interaction of spherical bodies - 26/04/2025 20:53
- Determination of the velocities of the points of the third-class mechanism with three leading links using the graph-analytical method - 26/04/2025 20:53
- System for monitoring the strength and dynamic characteristics of freight wagons in operation - 26/04/2025 20:53
- Effect of heat treatment on the mechanical properties of nylon parts in additive manufacturing - 26/04/2025 20:53
- Si and Mn effect on mechanical properties and linear shrinking of non-magnetic Cu-Al system cast bronzes - 26/04/2025 20:53
- Determination of the causes of rolling surface damage during operation of the railway wheels - 26/04/2025 20:53
- Testing of fine classification sifter in the processing and disposal of mining waste - 26/04/2025 20:53
- Determination of the harmonic distortion value of vibroacoustic signals in the process of drilling operations - 26/04/2025 20:53
- Investigation of the stress-strain state of mine shaft support under long-term operation - 26/04/2025 20:53
- Features of technological factors of well construction based on the example of oil and gas fields - 26/04/2025 20:53
Archive