Науковий вісник НГУ

Mathematical model of the process of drying fine dispersed materials under the influence of alternating electric current

• 
• 

User Rating:  / 0

PoorBest 

Details

Category: Content №3 2021

Last Updated on 23 June 2021

Published on 30 November -0001

Hits: 4459

Authors:

O.V.Zamytskyi, orcid.org/0000-0002-8113-6369, Kryvyi Rih National University, Kryvyi Rih, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

N.O.Holiver, orcid.org/0000-0002-9252-2839, Kryvyi Rih National University, Kryvyi Rih, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

N.V.Bondar, orcid.org/0000-0002-8713-265X, Kryvyi Rih National University, Kryvyi Rih, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

S.O.Kradozhon, orcid.org/0000-0001-8286-1389, Kryvyi Rih National University, Kryvyi Rih, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

повний текст / full article

Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2021, (3): 051 - 056

https://doi.org/10.33271/nvngu/2021-3/051

Abstract:

Purpose. Establishing the dependences and determining rational parameters of the process of drying fine materials by direct influence of an electric current.

Methodology. In the work, theoretical, analytical, empirical, and experimental methods as well as methods of mathematical statistics are used. Mathematical modeling of the process occurring during drying of finely dispersed materials by direct influence of alternating current is carried out.

Findings. As a result of the research on the basis of physical representations of the process of drying capillary-porous material, a mathematical model is designed connecting temperature and moisture content in a plate from capillary-porous material by means of equations of mathematical physics.

Originality. For the first time dependence has been obtained on the temperature and moisture content of the time and spatial coordinates of drying by passing an electric current through the layer of moist capillary-porous material, a feature which is both simultaneous accounting of thermal and diffusion processes in the material that can increase the accuracy of calculations and establish rational parameters of drying.

Practical value. The obtained dependences are used when developing calculation methods and designing an industrial drying plant.

Keywords: mathematical model, fine materials, drying

References.

1. Kyrychenko, E., Samusya, V., Kyrychenko, V., & Antonenko, A. (2015). Thermodynamics of Multiphase Flows in Relation to The Calculation of Deep-Water Hydraulic Hoisting. New Developments in Mining Engineering: Theoretical and Practical Solutions of Mineral Resources Mining, 305-311. https://doi.org/10.1201/b19901-54.

2. Souza Pinto, T.C., Souza, A.S., Batista, J.N.M., Sarkis, A.M., Leal Filho, L.S., Pdua, T.F., & Bttega, R. (2020). Characterization and drying kinetics of iron ore pellet feed and sinter feed. Drying Technology. https://doi.org/10.1080/07373937.2020.1747073.

3. Hao Zhou, Zhenya Lai, Laiquan Lv, Hao Fang, Hanxiao Meng, Mingxi Zhou, & Kefa Cen (2020). Improvement in the permeability of sintering beds by drying treatment after granulating sinter raw materials containing concentrates. Advanced Powder Technology, 31(8), 3297-3306. https://doi.org/10.1016/j.apt.2020.06.017.

4. Zamansky, I.B., Cohen, V.Kh., Rodionova, O.P., & Trochina,G.A. (1987). Installation for high-frequency drying of dielectric materials. USSR Patent No. 3894221.

5. Pievsky, I.M., & Milstein. I.Z. (1983). Method of drying products from capillary-porous materials. USSR Patent No. 363363112.

6. Antipov, S.T., Kazartsev, D.A., & Pavlovsky, M.Yu. (2003). Microwave-installation for loose materials drying. Russian Federation Patent No. 2255434. State Educational Institution Voronezh State Technological Academy.

7. Yureva, B., Dudkob, V., & Biakova,M. (2018). Application of Ecologically Clean Technology to Drying of Iron-Ore Pellets. Trans Tech Publications Ltd, Switzerland. https://doi.org/10.4028/www.scientific.net/SSP.284.828.

8. Zamitskyi, O.V., Bondar, N.V., & Kradozhon, S.O. (2019). Innovative technologies in the process of drying fine materials. Visnyk Kryvorizkoho Natsionalnoho Universytetu, 48, 83-88. https://doi.org/10.31721/2306-5451-2019-1-48-83-88.

9. Efimov, V.N., Sidorenko, Yu.A., Agafonov, D.A., & Yeltsin, S.I. (1999). Method of wet bulk materials drying. Russian Federation Patent No. 2143655. JSC Krasnoyarsk Non-Ferrous Metals Plant.

10. Antipov, S.T., Vizir, D.M., Shakhov, S.V., & Zhuchkov, A.V. (2012). Mathematical model of the process of thermal regeneration of diatomaceous earth. Vestnik Voronezskogo gosudarstvennogo universiteta inzenernyh tehnologij, (1), 62-67.

• < Prev
• Next >