The impact of the collective concentrate factory location on the circular mining technology for titanium-zirconium deposit

User Rating:  / 0
PoorBest 

Authors:


O. V. Lozhnikov*, orcid.org/0000-0003-1231-0295, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

* Corresponding author e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.


повний текст / full article



Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2026, (5): 030 - 037

https://doi.org/10.33271/nvngu/2026-5/030



Abstract:



Purpose.
To determine the effective location of a collective concentrate enrichment plant (CCEP) when develo­ping titanium-zirconium deposits using the principle of circular technology.


Methodology.
The work used a set of research methods: graphical-analytical method – to determine the parameters of technological schemes using the principles of circular technologies, as well as the location of the collective concentrate enrichment factory when moving the mining front; analytical method ‒ to establish the influence of the sequence of collective concentrate factory movements on the volumes of transport work in the pit and to substantiate the effective location of the elements of the enrichment complex.


Findings.
The established dependence of the average pipeline length on the number of movements at the collective concentrate enrichment plant indicates that two factory movements are most effective during pit operation. It was determined that when the pit’s productivity changes from 2.0 to 4.0 million m3, the average annual volume of haulage work for moving pulp through pipelines can be reduced by 2.1 times, with a fivefold increase in the collective concentrate factory’s output. The dependence of savings on operating costs for haulage work on the number of collective concentrate factory movements was established, thereby allowing us to determine the reduction in total economic costs. The results confirm the effectiveness of the proposed solutions, with one or two movements of the collective concentrate factory, depending on the pit’s productivity and the cost of moving the elements of the enrichment complex.


Originality.
The dependence of the average annual length of pipelines on the number of CCEP movements has been established, which allows us to determine that, during pit development with given parameters, pipeline length decreases by 23 %, with the greatest reduction occurring with three movements, amounting to 26 %. The influence of the number of CCEP movements on the weighted average annual volume of haulage work has been determined. According to the calculations, with a pit productivity of 2.0 million m3, the optimal number of CCEP movements is up to two. At the same time, the volume of haulage work is reduced by 44 % during pit development. When the number of CCEP movements increases to 3‒5, the volume of haulage work during pit operation decreases by only 8 % from 61.3 to 56.0 million km · t.


Practical value.
Technological schemes for mining titanium-zirconium deposits have been developed using the principles of circular technology, with the CCEP moving relative to the advancement of the mining front, thereby allowing determination of the parameters of the pit haulage system and calculation of the volumes of haulage work. Technical and economic indicators have been established for the haulage of minerals using technological schemes based on circular technology principles. An assessment of the feasibility of periodic movement of the collective concentrate enrichment plant, considering the advancement of the mining front in the pit, has been carried out.



Keywords:
pit, titanium-zirconium deposits, haulage work, circular technology, enrichment plant, collective concentrate

References.


1. Lozhnikov, O. V., Shustov, O. O., Chebanov, M. O., & Perkova, T. (2022). Methodological principles of the selection of a resource-saving technology while developing water-bearing placer deposits. Mining of Mineral Deposits, (16), 115-122. https://doi.org/10.33271/mining16.03.115

2. Ganzha, O. A., Kovalchuk, M. S., & Kuzmanenko, H. O. (2025). Zirconium-titanium deposits of Ukraine placer province: genesis, geological characteristics and mineralogy. Journal of Geology, Geography and Geoecology, 34(2), 275-291. https://doi.org/10.15421/112524

3. Sobko, B., Lozhnikov, O., & Drebenshtedt, C. (2020). Investigation of the influence of flooded bench hydraulic mining parameters on sludge pond formation in the pit residual space. E3S Web of Conferences, 168, 00037. EDP Sciences. https://doi.org/10.1051/e3sconf/202016800037

4. Lozhnikov, O., Sobko, B., & Pavlychenko, A. (2023). Technological Solutions for Increasing the Efficiency of Beneficiation Processes at the Mining of Titanium-Zirconium Deposits. Inzynieria Mineralna, 2023(1), 61-68. https://doi.org/10.29227/IM-2023-01-07

5. Hosseinzadeh, M., Alizadeh, M., & Raouf Hosseini, S. M. (2017). Mineralogical and physical beneficiation studies for iron extraction from Bardaskan titanomagnetite placer deposit. Journal of Mining and Environment, 8(2), 191-201. https://doi.org/10.22044/jme.2016.661

6. Hrinchenko, O., & Yushin, O. (2019). Potential of mining waste recycling in Ukraine. Monitoring 2019. European Association of Geoscientists & Engineers, 2019(1), 1-5. https://doi.org/10.3997/2214-4609.201903172

7. Cherep, A. (2024). Determination of rational technological schemes for the completion of open-pits taking into account land reclamation. IOP Conference Series Earth and Environmental Science, 1319(1), 012013. https://doi.org/10.1088/1755-1315/1319/1/012013

8. Singh, S., Maurya, P., Karmakar, A., Maurya, P. K., Pandey, N., Kumar, S., & Gupta, T. (2025). Mining tailings as a frontier for sustainable nanomaterials: advancing circular economy and environmental innovation. Environmental Geochemistry and Health, 47(7), 265. https://doi.org/10.1007/s10653-025-02566-x

9. Oliynik, T., Lyashenko, V., Dudar, T., & Oliynik, M. (2024). Increasing the Efficiency of Titanium-Iron ORE Enrichment Through Using New Type Separators. Mining Revue/Revista Minelor, 30(4). https://doi.org/10.2478/minrv-2024-0061

10.      Perks, C., Mudd, G. M., & Currell, M. (2022). Using corporate sustainability reporting to assess the environmental footprint of titanium and zirconium mining. The Extractive Industries and Society, 9, 101034. https://doi.org/10.1016/j.exis.2021.101034

11.      Rozendaal, A., Philander, C., & Heyn, R. (2017). The coastal heavy mineral sand deposits of Africa. South African Journal of Geology 2017, 120(1), 133-152. https://doi.org/10.25131/gssajg.120.1.133

12.      Sobko, B., Lozhnikov, O., & Kriachek, V. (2024). Assessment of the using a mobile crushing and sorting plant investment attractiveness at the development of construction material quarries. Mining of Mineral Deposits, 18(4), 34-44. https://doi.org/10.33271/mining18.04.034

13.      Chebanov, M., Borys, S., & Mykhailo, P. (2024). Substantiating the rational parameters for a complicated non-transport system when mining low-thickness fireclay deposits. IOP Conference Series: Earth and Environmental Science, 1319(1), 012001. https://doi.org/10.1088/1755-1315/1319/1/012001

14.      Antony Jose, S., Calhoun, J., & Renteria, O. B. (2024). Promoting a circular economy in mining practices. Sustainability, 16(24), 11016. https://doi.org/10.3390/su162411016

15.      Kinnunen, P. H. M., & Kaksonen, A. H. (2019). Towards circular economy in mining: Opportunities and bottlenecks for tailings valorization. Journal of cleaner production, 228, 153-160. https://doi.org/10.1016/j.jclepro.2019.04.171

16.      Upadhyay, A., Laing, T., Kumar, V., & Dora, M. (2021). Exploring barriers and drivers to the implementation of circular economy practices in the mining industry. Resources Policy, 72, 102037.
https://doi.org/10.1016/j.resourpol.2021.102037

17.      Rao, R. B., Mishra, B., & Singh, D. (2024). Recovery of rare earth element-bearing placer minerals. Journal of Mining Science, 60(1), 163-170. https://doi.org/10.1134/S1062739124010186

18.      Jones, P., & Wynn, M. G. (2021). The circular economy, resilience, and digital technology deployment in the mining and mineral industry. International Journal of Circular Economy and Waste Management (IJCEWM), 1(1), 16-32. https://doi.org/10.4018/IJCEWM.2021010102

19.      Ganzha, E. A., Lalomov, A. V., Chefranova, A. V., Grigor’eva, A. V., & Magazina, L. O. (2019). Lithostructural geological-genetic model and mineral composition of the Krasnokutsk rare metal–titanium placer deposit (Ukraine). Lithology and Mineral Resources, 54(6), 465-479. https://doi.org/10.1134/S002449021906004X

20.      Adamchuk, A., & Shustov, O. (2023). Control of Dump Stability Loading Rock on its Edge. Inżynieria Mineralna – Journal of the Polish Mineral Engineering Society, 1(51), 91-96. https://doi.org/10.29227/IM-2023-01-11

 

Guest Book

If you have questions, comments or suggestions, you can write them in our "Guest Book"

Registration data

ISSN (print) 2071-2227,
ISSN (online) 2223-2362.
Journal was registered by Ministry of Justice of Ukraine.
Registration number КВ No.17742-6592PR dated April 27, 2011.

Contacts

D.Yavornytskyi ave.,19, pavilion 3, room 24-а, Dnipro, 49005
Tel.: +38 (066) 379 72 44.
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
You are here: Home About the journal publisher EngCat Archive 2026 Content №5 2026 The impact of the collective concentrate factory location on the circular mining technology for titanium-zirconium deposit