Geomechanical substantiation of parameters for safe completion of mining the coal reserves adjacent to main workings
/ 0
- Details
- Category: Content №1 2023
- Last Updated on 25 February 2023
- Published on 30 November -0001
- Hits: 3086
Authors:
V.I.Bondarenko, orcid.org/0000-0001-7552-0236, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
H.A.Symanovych, orcid.org/0000-0002-2121-1742, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
I.A.Kovalevska*, orcid.org/0000-0002-0841-7316, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
M.V.Shyshov, orcid.org/0000-0003-1627-0868, LLC “DTEK Еnergy”, Kyiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
V.H.Yakovenko, orcid.org/0000-0002-1899-0503, PJSC “CG “Pokrovske”, Pokrovsk, Ukraine», e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
* Corresponding author e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2023, (1): 046 - 052
https://doi.org/10.33271/nvngu/2023-1/046
Abstract:
Purpose. Geomechanical substantiation of the parameters for conducting stope operations, ensuring the operational state of main workings.
Methodology. The research is performed using an algorithm which includes the sequential execution of interrelated stages: analysis of mining-geological and mining-technical conditions for maintaining the network of main workings; mine observations of their state with the identification of specifics of rock pressure manifestations and predicting the probable negative consequences of conducting stope operations in the immediate vicinity; preliminary substantiation of possible technological options for mining the coal seam, taking into account the preservation of operational state of main workings. Scientific calculations for determining the most expedient option are based on the development of geomechanical models of the rock mass behavior around the main workings when mining the adjacent extraction site; analysis of the mass stress-strain state with the prediction of probable rock pressure manifestations; development of recommendations for limiting (or completely eliminating) the negative consequences of conducting stope operations near main workings. The above algorithm of actions uses a combination of experimental mine research methods with technologies for performing computational experiments based on the finite element method.
Findings. A systematic analysis of the mining-geological and mining-technical conditions for maintaining the network of main workings has been performed, the results of which are used to substantiate ideas about the mechanism for the occurrence of specifics of rock pressure manifestations, recorded during instrumental observations of their state. Three options have been developed for completing the mining of the extraction site adjacent to the mine horizon main workings. For each of them, a geomechanical model has been constructed for calculating the stress-strain state of the adjacent coal-bearing mass. Its analysis makes it possible to formulate a number of recommendations regarding the rational parameters for conducting stope operations, as well as structural and technological solutions to increase the stability of the main workings and maintain the conditions for their safe operation.
Originality. New dependences of influence of the extraction sites on the main working network stability depending on the texture and mechanical properties of lithotypes have been obtained based on the research on the stress-strain state of a weakly metamorphosed mass. For the first time, geomechanical models have been developed of the mutual influence of main workings on the parameters for conducting stope operations.
Practical value. The presented recommendations simultaneously reduce the loss of coal reserves and preserve the network of main workings in proper operational state.
Keywords: rock mass, mine working, stability, modeling, stress-strain state
References.
1. Bondarenko, V., Kovalevska, I., Symanovych, G., Sotskov, V., & Barabash, M. (2018). Geomechanics of interference between the operation modes of mine working support elements at their loading. Mining Science, (25), 219-235. https://doi.org/10.5277/msc182515.
2. Shi, L., Liu, Y., & Wang, S. (2015). Overburden failure height and fissure evolution characteristics of deep buried, extra thick coal seam and fully-mechanized caving mining of China. Proceedings of the 2015 International Conference on Water Resources and Environment, (Beijing, 25-28 July 2015), 207-216. https://doi.org/10.1201/b19079-36.
3. Sakhno, I., Sakhno, S., & Isaienkov, O. (2022). Method for controlling the floor heave in mine roadways of underground coal mines. Mining of Mineral Deposits, 16(4), 1-10. https://doi.org/10.33271/mining16.01.010.
4. Nazymko, V., & Griniov, V. (2016). Implementing FLAC3D model for simulating deformation mechanism of steel frame support set by actual profile. Mining of Mineral Deposits, 10(1), 57-62. https://doi.org/10.15407/mining10.01.057.
5. Matayev, A., Abdiev, A., Kydrashov, A., Musin, A., Khvatina, N., & Kaumetova, D. (2021). Research into technology of fastening the mine workings in the conditions of unstable masses. Mining of Mineral Deposits, 15(3), 78-86. https://doi.org/10.33271/mining15.03.078.
6. Kovalevska, I., Zhuravkov, M., Chervatiuk, V., Husiev, O., & Snihur, V. (2019). Generalization of trends in the influence of geomechanics factors on the choice of operation modes for the fastening system in the preparatory mine workings. Mining of Mineral Deposits, 13(3), 1-11. https://doi.org/10.33271/mining13.03.001.
7. Kravets, V. G., Gaiko, G. I., Zaichenko, S. V., & Stovpnyk, S. M. (2015). Progressive method of anchor-concrete support of capital mine workings and tunnels. Rozrobka Rodovyshch, 9(3), 307-312. https://doi.org/10.15407/mining09.03.307.
8. Han, F. S., & Wu, X. L. (2013). Study on Rock Bolt Support of Roadway of Coal Mine Using Neural Network. Applied Mechanics and Materials, 448-453, 3799-3802. https://doi.org/10.4028/www.scientific.net/amm.448-453.3799.
9. Maghous, S., Bermand, D., & Couto, E. (2012). Three-dimensional numerical simulation of rock deformation in bolt-supported tunnels: A homogenization approach. Tunnelling and Underground Space Technology, (31), 68-79. https://doi.org/10.1016/j.tust.2012.04.008.
10. Bondarenko, V., Kovalevska, I., Cawood, F., Husiev, O., Snihur, V., & Jimu, D. (2021). Development and testing of an algorithm for calculating the load on support of mine workings. Mining of Mineral Deposits, 15(1), 1-10. https://doi.org/10.33271/mining15.01.001.
11. Małkowski, P., Niedbalski, Z., Majcherczyk, T., & Bednarek, Ł. (2020). Underground monitoring as the best way of roadways support design validation in a long time period. Mining of Mineral Deposits, 14(3), 1-14. https://doi.org/10.33271/mining14.03.001.
12. Dyczko, A., Kamiński, P., Jarosz, J., Rak, Z., Jasiulek, D., & Sinka, T. (2021). Monitoring of roof bolting as an element of the project of the introduction of roof bolting in polish coal mines-case study. Energies, 15(1), 95. https://doi.org/10.3390/en15010095.
13. Snihur, V., Bondarenko, V., Kovalevska, I., Husiev, O., & Shaikhlislamova, I. (2022). Optimization solution substantiation for resource-saving maintenance of workings. Mining of Mineral Deposits, 16(1), 9-18. https://doi.org/10.33271/mining16.01.009.
14. Ricketts, B. (2019). Eeurocoal. Changing the face of coal: an outline strategic research agenda for future coal-related RTD in the European Union. Retrieved from https://ec.europa.eu/energy/sites/ener/files/documents/12.1_euracoal.pdf.
15. Dubiński, J., Prusek, S., Turek, M., & Wachowicz, J. (2020). Hard Coal Production Competitiveness in Poland. Journal of Mining Science, (56), 322-330. https://doi.org/10.1134/S1062739120026806.
16. Shavarskyi, Ia., Falshtynskyi, V., Dychkovskyi, R., Akimov, O., Sala, D., & Buketov, V. (2022). Management of the longwall face advance on the stress-strain state of rock mass. Mining of Mineral Deposits, 16(3), 78-85. https://doi.org/10.33271/mining16.03.078.
17. Markevych, K., Maistro, S., Koval, V., & Paliukh, V. (2022). Mining sustainability and circular economy in the context of economic security in Ukraine. Mining of Mineral Deposits, 16(1), 101-113. https://doi.org/10.33271/mining16.01.101.
18. Sdvyzhkova, O., Babets, D., Moldabayev, S., & Sarybayev, M. (2020). Mathematical modeling a stochastic variation of rock properties at an excavation design. In 20 th International Multidisciplinary Scientific GeoConference SGEM 2020, (pp. 165-172). Albena, Bulgaria. https://doi.org/10.5593/sgem2020%2F1.2%2Fs03.021.
19. Skipochka, S. (2019). Conceptual basis of mining intensification by the geomechanical factor. E3S Web of Conferences, (109), 00089. https://doi.org/10.1051/e3sconf/201910900089.
Newer news items:
- Minimization of power fluctuations of wind power plants when constructed in exclusion zones of enterprises - 25/02/2023 01:06
- Mathematical model of the closed-loop system of excavator bucket positioning - 25/02/2023 01:06
- Increasing the energy efficiency of modes of distribution networks with photovoltaic stations - 25/02/2023 01:06
- Load of a semi-car having the dismountable roof of composites - 25/02/2023 01:06
- Analysis of surface settlements induced by tunnel excavation with EPB-TBM - 25/02/2023 01:06
- Features of modernization of a truck with a hybrid power transmission - 25/02/2023 01:05
- Geometry variation of ballasted railway tracks due to weather conditions - 25/02/2023 01:05
- Graphitizing modification of the axial zone of cast iron rolling rolls in the liquidus-solidus temperature range - 25/02/2023 01:05
- Reverse flotation process in double stage on the Algerian phosphate ore treatment - 25/02/2023 01:05
- Modeling of drilling water supply wells with airlift reverse flush agent circulation - 25/02/2023 01:05
Older news items:
- Pressure distribution in the oil reservoir in a two-dimensional plane - 25/02/2023 01:05
- Predicting underground mining impact on the earth’s surface - 25/02/2023 01:05
- Peculiarities of the formation of the Zhailma volcano-tectonic deep - 25/02/2023 01:05
- Algorithm for the formation of price lists for raw amber taking into account individual consumer characteristics - 25/02/2023 01:05
- Lithium and gold content in salt domes and saline lands of Western and Southern Kazakhstan - 25/02/2023 01:05
- Method for determining the ultimate sorption capacity of coal matter by EPR-spectroscopy - 25/02/2023 01:05
