Improvement of sub-level caving mining methods during high-grade iron ore mining

User Rating:  / 1
PoorBest 

Authors:


A.V.Kosenko, orcid.org/0000-0003-3058-4820, Institute of Physics of Mining Processes of the National Academy Sciences of Ukraine, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.


повний текст / full article



Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2021, (1): 019 - 025

https://doi.org/10.33271/nvngu/2021-1/019



Abstract:



Purpose.
To improve of the sub-level caving mining methods during mining of deposits of high-grade iron ores by applying a rational mode and intensifying the ore drawing.


Methodology.
It included an analysis of scientific literature, design documentation and the practice of mining of deposits of high-grade iron-ores in complex geomechanical conditions of deep horizons of mines, to establish the formation of fundamentally new foundations of scientific-and-design solutions for the rational extraction of minerals; numerical (application a special computer software package PFC 3D) and physical (based on the application of volumetric physical models and equivalent materials) modeling of ore drawing, aimed at identifying regularities of recovery process depending on the mining-geological and mining conditions of the mining of deposits, and also the physical- and-mechanical properties of the loosened ore mass.


Findings.
Regularities of changes in the qualitative and quantitative recovery percentages depending on the intensity of the ore drawing and physical-and-mechanical properties of the ore have been established using numerical and physical simulation. The obtained regularities made it possible to substantiate the rational parameters of the structural elements of the technological scheme for drawing and delivery of ore. A linear-alternating condition of ore drawing was developed, which will ensure an increase in the extraction of pure ore up to 10% and, as a result, up to 4.6% of quantitative and up to 5.2% of qualitative indicators of ore percentages, as well as up to 1.5% of absolute quality of mined ore mass.


Originality.
Power-law dependencies of the change in the angle of ore tapping on the intensity of the ore drawing and the ultimate strength of the ore for uniaxial compression have been established as well as dependencies of the increase in the volume of the tapping figure, when a linear-alternating condition of ore drawing is applied, on the intensity of the ore drawing, the height of the collapsed ore layer and the ultimate strength of the ore for uniaxial compression.


Practical value
. A linear-alternating condition of ore drawing has been developed, the implementation of which in practice makes it possible to increase the qualitative and quantitative recovery percentages and eliminate the human factor while observing the ore drawing planograms.



Keywords:
high-grade iron ores, sub-level caving, recovery percentages, ore losses, dilution, ore drawing, physical modeling, numerical modeling

References.


1.Yakubov, N.M. (2015). Mineral resources base of ferrous metallurgy today and the prospects for the development of the steel industry in Uzbekistan. Economy in the Industry, (2), 119-123. https://doi.org/10.17073/2072-1633-2015-2-119-123.

2.Smirnov, A.Ya., Yevtekhov, Ye.V., & Yevtekhov,V.D. (2014). Geological structure of hematite quartzite deposits in Kryvyi Rih basin. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (2), 17-22.

3.Stupnik, M., Kolosov, V., Pysmennyi, S., & Kostiantyn, K. (2019). Selective mining of complex stuctured ore deposits by open stope systems. E3S Web of Conferences, 123, 01007. https://doi.org/10.1051/e3sconf/201912301007.

4.Pysmennyi, S., Brovko, D., Shwager, N., Kasatkina, I., Paraniuk, D., & Serdiuk, O. (2018). Development of complex-structure ore deposits by means of chamber systems under conditions of the Kryvyi Rih iron ore field. Eastern-European Journal of Enterprise Technologies, 5(1(95)), 33-45. https://doi.org/10.15587/1729-4061.2018.142483.

5.Kosenko, A.V. (2018). Ways to increase the efficiency of development of deposits of natural high-grade iron ores at great depths. Hirnychyi Visnyk, (103), 70-75.

6.Stupnik, M., Kalinichenko, O., Kalinichenko, V., Pysmennyi, S., & Morhun, O. (2018). Choice and substantiation of stable crown shapes in deep-level iron ore mining. Mining of Mineral Deposits, 12(4), 56-62. https://doi.org/10.15407/mining12.04.056.

7.Stupnik, M.I., Kalinichenko, V.O., Pysmennyi,S.V., & Kalinichenko, O.V. (2018). Determining the qualitative composition of the equivalent material for simulation of Kryvyi Rih iron ore basin rocks. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (4), 21-27. https://doi.org/10.29202/nvngu/2018-4/4.

8.Sosnovskiy,L.A., Zhuravkov,M.A., Sherbakov,S.S., Bogdanovich,A.V., Makhutov,N.A., & Zatsarinnyi,V.V. (2015). Fundamental last of the ultimate state of objects at the effects of multi parameter power factors and thermodynamic environment. Part II. Mechanics of Machines, Mechanisms and Materials, 4(33), 76-92.

9.Mashchenko, V.A., Khomenko, O.Ye., & Kvasnikov, V.P. (2020). Thermodynamic aspect of rock destruction. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (1), 25-30. https://doi.org/10.33271/nvngu/2020-1/025.

10.Laptev, V.V. (2019). Numerical modelling of fragmented mined rock flow during ore drawing using the ROCKY DEM programme. Vestnik MGTU, 22(1), 149-157. https://doi.org/10.21443/1560-9278-2019-22-1-149-157.

11.Kononenko, M., Khomenko, O., Sudakov, A., Drobot, S., & Lkhagva, T. (2016). Numerical modelling of massif zonal structuring around underground working.Mining Of Mineral Deposits,10(3), 101-106. https://doi.org/10.15407/mining10.03.101.

12.Golik, V.I., Lukyanov, V.G., & Komashchenko,V.I. (2016). Modeling ore quality using ore caving technique. Bulletin of the Tomsk Polytechnic University. Geo Assets Engineering. 327(10), 6-12.

13.Kosenko, A.V., & Tarasiutin, V.M. (2018). Research on technological process of ore production on the basis of physical modeling. Vcheni zapysky Tavriiskoho natsionalnoho universytetu imeni V.I.Vernadskoho: Seriia Tekhnichni nauky, 29(68(4(2)), 73-79.

14.Sdvyzhkova, O., Babets, D., Kravchenko, K., & Smirnov,A. (2015). Rock state assessment at initial stage of longwall mining in terms of poor rocks of Western Donbass. New Developments in Mining Engineering 2015, 65-70. https://doi.org/10.1201/b19901-13.

15.Khomenko, O., Kononenko, M., & Bilegsaikhan, J. (2018). Classification of Theories about Rock Pressure. Solid State Phenomena, 277, 157-167. https://doi.org/10.4028/www.scientific.net/ssp.277.157.

16.Khomenko, O., & Kononenko, M. (2019). Geo-energetics of Ukrainian crystalline shield.Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (3), 12-21. https://doi.org/10.29202/nvngu/2019-3/3.

17.Khomenko, O., Kononenko, M., & Petlovanyi, M. (2015). Analytical modeling of the backfill massif deformations around the chamber with mining depth increase. New Developments in Mining Engineering 2015, 265-269. https://doi.org/10.1201/b19901-47.

18.Khomenko, O., Kononenko, M., & Netecha, M. (2016). Industrial research into massif zonal fragmentation around mine workings. Mining of Mineral Deposits, 10(1), 50-56. https://doi.org/10.15407/mining10.01.050.

 

Visitors

6227521
Today
This Month
All days
1353
54198
6227521

Guest Book

If you have questions, comments or suggestions, you can write them in our "Guest Book"

Registration data

ISSN (print) 2071-2227,
ISSN (online) 2223-2362.
Journal was registered by Ministry of Justice of Ukraine.
Registration number КВ No.17742-6592PR dated April 27, 2011.

Contacts

D.Yavornytskyi ave.,19, pavilion 3, room 24-а, Dnipro, 49005
Tel.: +38 (056) 746 32 79.
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
You are here: Home About the journal editorial board EngCat Archive 2021 Content №1 2021 Improvement of sub-level caving mining methods during high-grade iron ore mining