Науковий вісник НГУ

Research on occurrence features and ways to improve the quality of productive hydrocarbon horizons demarcation

• 
• 

User Rating:  / 0

PoorBest 

Details

Category: Content №3 2024

Last Updated on 28 June 2024

Published on 30 November -0001

Hits: 2347

Authors:

Ye.A.Koroviaka*, orcid.org/0000-0002-2675-6610, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Ye.M.Stavychnyi, orcid.org/0000-0001-8583-2313, Public Joint-Stock Company “Ukrnafta”, Kyiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

O.B.Martsynkiv, orcid.org/0000-0003-4583-5944, Ivano-Frankivsk National Technical University of Oil and Gas, Ivano-Frankivsk, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

A.O.Ihnatov, orcid.org/0000-0002-7653-125X, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

A.V.Yavorskyi, orcid.org/0000-0003-4484-3723, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

* Corresponding author e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

повний текст / full article

Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2024, (3): 005 - 011

https://doi.org/10.33271/nvngu/2024-3/005

Abstract:

Purpose. On the base of the geological cross-section analysis of the productive stratum and the features of the filtration-capacitance characteristics of the reservoir rocks, to develop effective technological fastening schemes for the delimitation of closely located different-pressure and different-saturated horizons on the example of the Romny group deposits.

Methodology. The proposed work is an analytical and production research on the geological-and-lithological structure features of borehole sections of the Romny structure and the results of their drilling and cementing based on the analysis of electrical, pulsed neutron-neutron, acoustic and other types of loggings. The data on the spectrum of the oil and gas boreholes properties cores was obtained on the basis of macroscopic description, methodical and practical methods of lithological, sedimentological, and facies analysis. The filtration capacity of permeable reservoir rocks was examined with the application of the Darcy’s device. Modern methods of experimental research analysis using mathematical and physical modeling techniques, methods for processing research results in SolidWorks, STATGRAPHICS, MATHSAD, EXCEL, control and measuring devices were applied.

Findings. It has been established that currently applied fastening methods do not provide the prerequisites for high-quality delineation of productive horizons, as a result of which interlayer flows occur, that is lead to the loss of the potential flow rate of the boreholes and increasing in the cost of hydrocarbon production. A new design of the borehole is proposed in order to increase the reliability of the fastening. It has been proven that the effectiveness of opening oil-saturated reservoirs increases with the application of specialized drilling flushing fluids capable of minimizing the risk of their clogging. The necessity of cementing the production column and the shank with tamponage materials based on composite cements is substantiated, while effective buffer systems should be applied to separate process fluids.

Originality. On the base of the systematization and correlation of the geophysical material, the specific features of the structure of the productive strata of B-18 and B-19 horizons were evaluated as well as the nature and degree of saturation, the filtration-capacity characteristics of the seams. It has been proven that in order to reliably cover the high-pressure water-bearing horizon B-18 with an operational column, it is recommended to include packer systems of various types of activation in the equipment.

Practical value. On the basis of the detailed multifaceted results of laboratory and industrial testing and analytical model research, technological solutions have been developed for boreholes fastening in the conditions of the occurrence of closely located productive horizons of different pressures and different saturations on the example of the Romny group deposits.

Keywords: borehole, core, casing, reservoir rock, cementing, productive horizon, packer

References.

1. Karpenko, O., Mykhailov, V., & Karpenko, I. (2015). Eastern Dnieper–donets depression: predicting and developing hydrocarbon resource. Visnyk of Taras Shevchenko National University of Kyiv, Geology, 1(68), 49-54.

2. Hossain, M. E., & Islam, M. R. (2020). Drilling engineering. Gulf Professional Publishing. ISBN: 978-0-128-20193-0.

3. Sudakov, A., Dreus, A., Ratov, B., Sudakova, О., Khomenko, O., Dziuba, S., …, & Ayazbay, M. (2020). Substantiation of Thermomechanical Technology Parameters of Absorbing Levels Isolation of the Boreholes. News of National Academy of Sciences of the Republic of Kazakhstan, 2(440), 63-71. https://doi.org/10.32014/2020.2518-170X.32.

4. Bazaluk, O., Velychkovych, A., Ropyak, L., Pashechko, M., Pryhorovska, T., & Lozynskyi, V. (2021). Influence of Heavy Weight Drill Pipe Material and Drill Bit Manufacturing Errors on Stress State of Steel Blades. Energies, 14(14), 4198. https://doi.org/10.3390/en14144198.

5. Matthew, J., & Hatami, P. E. (2017). Oilfield Survival Guide. Oilfield Books, LLC. ISBN: 978-0692813089.

6. Dychkovskyi, R. O., Lozynskyi, V. H., Saik, P. B., Petlovanyi, M. V., Malanchuk, Ye. Z., & Malanchuk, Z. R. (2018). Modeling of the disjunctive geological fault influence on the exploitation wells stability during underground coal gasification. Archives of Civil and Mechanical Engineering, 18(4), 1183-1197. https://doi.org/10.1016/j.acme.2018.01.012.

7. Liu, G. (2021). Applied well cementing engineering. Gulf Professional Publishing. https://doi.org/10.1016/C2019-0-03030-0.

8. Ratov, B. T., Fedorov, B. V., Syzdykov, A. Kh., Zakenov, S. T., & Sudakov, A. K. (2021). The main directions of modernization of rock-destroying tools for drilling solid mineral resources. 21^st International Multidisciplinary Scientific GeoConference SGEM 2021. Section Exploration & Mining, 503-514. https://doi.org/10.5593/sgem2021/1.1/s03.062.

9. Ouadfeul, S.-A., & Aliouane, L. (2020). Oil and Gas Wells. IntechOpen. ISBN: 978-1-83880-137-3.

10. Robertson, J. O., & Chilingar, G. V. (2017). Environmental aspects of oil and gas production. Wiley-Scrivener. ISBN: 978-1-119-11737-7.

11. Luban, Yu., Luban, S., Zholob, N., Zabiiaka, V., Hafych, I., & Sachenko, H. (2021). Inverted oil-emulsion cement slurry for fastening productive intervals of deep wells opened on hydrocarbon emulsions. Oil&Gas Industry of Ukraine, 2(50), 16-20.

12. Sudakov, A, Chudyk, I., Sudakova, D., & Dziubyk, L. (2019). Innovative isolation technology for swallowing zones by thermoplastic materials. E3S Web of Conferences, (123), 1-10. https://doi.org/10.1051/e3sconf /201912301033.

13. Orychak, M., Femiak, Y., & Riznychuk, A. (2020). Influence of different reagents on the adhesive properties of grout solutions. Oil&Gas Industry of Ukraine, 4, 9-12.

14. Ihnatov, A., Haddad, J. S., Koroviaka, Ye., Aziukovskyi, O., Rastsvietaiev, V., & Dmytruk, O. (2023). Study of Rational Regime and Technological Parameters of the Hydromechanical Drilling Method. Archives of Mining Sciences, 68(2), 285-299. https://doi.org/10.24425/ams.2023.146180.

15. Ratov, B., Borash, A., Biletskiy, M., Khomenko, V., Koroviaka, Y., Gusmanova, A., …, & Matуash, O. (2023). Identifying the operating features of a device for creating implosion impact on the water bearing formation. Eastern-European Journal of Enterprise Technologies, 5(1(125)), 35-44. https://doi.org/10.15587/1729-4061.2023.287447.

16. Dudlia, M., Pinka, J., Dudlia, K., Rastsvietaiev, V., & Sidorova, M. (2018). Influence of Dispersed Systems on Exploratory Well Drilling. Solid State Phenomena, (277), 44-53. https://doi.org/10.4028/www.scientific.net/SSP.277.44.

17. Ihnatov, A., Koroviaka, Y., Rastsvietaiev, V., & Tokar, L. (2021). Development of the rational bottomhole assemblies of the directed well drilling. Gas Hydrate Technologies: Global Trends, Challenges and Horizons – 2020, E3S Web of Conferences, 230, 01016. https://doi.org/10.1051/e3sconf/202123001016.

18. Skakalska, L., Nazarevych, A., & Kosarchyn, V. (2021). The theoretical-empirical technique of hydrocarbons prediction in wells sections. New aspects. Geofizicheskiy Zhurnal, 43(1), 160-180. https://doi.org/10.24028/gzh.0203-3100.v43i1.2021.225545.

19. Fedoriv, V. V. (2018). The use of gamma-spectrometry and gamma-gamma-density logging for the study of reservoir rocks of complex structures. Prospecting and Development of Oil and Gas Fields, 2(67), 41-46. https://doi.org/10.31471/1993-9973-2018-2(67)-41-46.

20. Skakalska, L., & Nazarevych, A. (2015). Predicting of oil-gas-water-saturation of rocks of different lithology and geodynamic genesis in open-casts of wells. Geodynamics, 1(18), 99-116. https://doi.org/10.23939/jgd2015.01.099.

21. Markina, N. K., Horyshnyakova, Ya. V., Pylypenko, L. V., Sydelnyk, O. S., & Petik, V. O. (2022). Scientific substantiation of the conditions for the implementation of water protection measures in case of pollution of the aquatic environment with rare and dissolved petroleum products. Problems of environmental protection and environmental safety, 44, 110-119. ISSN 2522-1388.

22. Pavlychenko, A. V., Ihnatov, A. O., Koroviaka, Ye. A., Ratov, B. T., & Zakenov, S. T. (2022). Problematics of the issues concerning development of energy-saving and environmentally efficient technologies of well construction. ICSF-2022. IOP Conf. Series: Earth and Environmental Science, 1049(2022), 012031. https://doi.org/10.1088/1755-1315/1049/1/012031.

23. Biletskiy, M. T., Ratov, B. T., Khomenko, V. L., Borash, B. R., & Borash, A. R. (2022). Increasing the mangystau peninsula underground water reserves utilization coefficient by establishing the most effective method of drilling water supply wells. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences, (5), 51-62. https://doi.org/10.32014/2518-170X.217.

24. Ahmad, H. M., Murtaza, M., Shakil Hussain, S. M., Mahmoud, M., & Kamal, M. S. (2023). Performance evaluation of different cationic surfactants as anti-swelling agents for shale formations. Geoenergy Science and Engineering, 230, 212185. https://doi.org/10.1016/j.geoen.2023.212185.

25. Davydenko, A. N., Kamyshatsky, A. F., & Sudakov, A. K. (2015). Innovative Technology for Preparing Washing Liquid in the Course of Drilling. Science and innovation, 11(5), 5-13. https://doi.org/10.15407/scine11.05.005.

26. Kozhevnykov, A., Khomenko, V., Liu, B. C., Kamyshatskyi, O., & Pashchenko, O. (2020). The History of Gas Hydrates Studies: From Laboratory Curiosity to a New Fuel Alternative. Key Engineering Materials, 844, 49-64. https://doi.org/10.4028/www.scien-tific.net/kem.844.49.

27. Fink, J. (2021). Petroleum Engineer’s Guide to Oil Field Chemicals and Fluids. Elsevier Inc. publishing. https://doi.org/10.1016/C2020-0-02705-2.

28. Koroviaka, Ye. A., Ihnatov, A. O., Pavlychenko, A. V., Valouch, K., Rastsvietaiev, V. O., Matyash, O. V., Mekshun, M. R., & Shypunov, S. O. (2023). Studying the Performance Features of Drilling Rock Destruction and Technological Tools. Journal of Superhard Materials, 45(6), 466-476. https://doi.org/10.3103/S1063457623060059.

29. Ihnatov, A. O., Koroviaka, Ye. A., Pavlychenko, A. V., Rastsvietaiev, V. O., & Askerov, I. K. (2023). Determining key features of the operation of percussion downhole drilling machines. ICSF-2023. IOP Conf. Series: Earth and Environmental Science, 1245. 012053. https://doi.org/10.1088/1755-1315/1254/1/012053.

30. Tsaplin, Ye., Rastsvietaiev, V., Dudlia, K., & Morozova, T. (2015). Results of applying drilling and injection technologies for strengthening soil massif. Theoretical and Practical Solutions of Mineral Resources Mining, 107-110.

• Next >