Haul road condition impact on tire life of mining dump truck
/ 0
- Details
- Parent Category: 2022
- Category: Content №6 2022
- Created on 25 December 2022
- Last Updated on 25 December 2022
- Published on 30 November -0001
- Written by A. Shakenov, A. Sadkowski, I. Stolpovskikh
- Hits: 2873
Authors:
A.Shakenov, orcid.org/0000-0002-1336-4140, Satbaev University, Almaty, the Republic of Kazakhstan, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
A.Sadkowski*, orcid.org/0000-0002-1041-4309, Silesian University of Technology, Katowice, the Republic of Poland, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
I.Stolpovskikh, orcid.org/0000-0003-2893-5070, Satbaev University, Almaty, the Republic of Kazakhstan, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
* Corresponding author e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2022, (6): 025 - 029
https://doi.org/10.33271/nvngu/2022-6/025
Abstract:
Purpose. Off-road tires (OTR) for mining and earthmoving applications which are specially developed for extreme mine site conditions can take 1020% of transportation costs. Up to 15% of OTR content is natural rubber produced from a rubber tree known as hevea brasiliensis. A significant number of OTR fail before the target life built in by tire manufacturers. This has certain negative impacts on the environment and wildlife due to deforestation effect. Thus, the purpose of the work is to increase the durability or, in the terminology of the operators, the mileage of the OTR.
Methodology. The current study represents analyses of new modern digital technology for monitoring the mining haul road condition within a site study on Bogatyr Komir coal mine in North Kazakhstan. The influence of operating conditions was controlled, i.e. road quality, temperature conditions, tire pressure, and other parameters on tire life.
Findings. The results show the effectiveness of digital technologies and the possibility of extending the life of tires by following the recommendations of the system in a timely manner. As a result of the analysis of temperature regimes and pressure in tires, especially in summer conditions, recommendations for rational operating conditions were determined, which makes it possible to increase the durability of tires.
Originality. Modern operational digital methodology for monitoring open pit mines road condition defines ton kilometer per hour (TKPH) indicator per every trip, which provides on-time information for road design and maintenance.
Practical value. Growing worldwide demand is driving the development of the mining industry. In the future, more and more fields with a low content of produced raw materials will be put into operation. The development of deposits with a low content of a useful product means that more rock mass must be moved in order for these developments to be profitable. Transportation costs in low-grade mines can be as high as 70% of mining costs due to more haul trucks and longer roads that need to be commissioned. Thus, an increase in the durability of OTR can give a great economic effect not only in the conditions of the Bogatyr Komir quarry under consideration but also in other mining and processing plants.
Keywords: mine haul roads, tires life, mining dump truck, natural rubber
References.
1. Purhamadani, Eh., Bagherpour, R., & Tudeshki, H. (2021). Energy consumption in open-pit mining operations relying on reduced energy consumption for haulage using in-pit crusher systems. Journal of Cleaner Production, 291, 125228. https://doi.org/10.1016/j.jclepro.2020.125228.
2. Taran, I., & Litvin V. (2018). Determination of rational parameters for urban bus route with combined operating mode. Transport Problems, 13(4), 157-171. https://doi.org/10.20858/tp.2018.13.4.14.
3. Naumov, V., Zhamanbayev, B., Agabekova, D., Zhanbirov, Z., & Taran, I. (2021). Fuzzy-logic approach to estimate the passengers preference when choosing a bus line within the public transport system. Communications Scientific Letters of the University of ilina, 23(3), A150-A157. https://doi.org/10.26552/com.C.2021.3.A150-A157.
4. Saukenova, I., Oliskevych, M., Taran, I., Toktamyssova, A., Aliakbarkyzy, D., & Pelo, R. (2022). Optimization of schedules for early garbage collection and disposal in the megapolis. Eastern-European Journal of Enterprise Technologies, 1(3-115), 13-23. https://doi.org/10.15587/1729-4061.2022.251082.
5. Taran, I., & Bondarenko, A. (2017). Conceptual approach to select parameters of hydrostatic and mechanical transmissions for wheel tractors designed for agrucultural opeations. Archives of transport, 41(1), 89-100. https://doi.org/10.5604/01.3001.0009.7389.
6. Sadkowski, A., Utegenova, A., Kolga, A.D., Gavrishev, S.E., Stolpovskikh, I., & Taran, I. (2019). Improving the efficiency of using dump trucks under conditions of career at open mining works. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (2), 36-42. https://doi.org/10.29202/nvngu/2019-2/8.
7. Lindeque, G.C. (2016). A critical investigation into tire life on an iron ore haulage system. Journal of the Southern African Institute of Mining and Metallurgy, 116(40), 317-322. https://doi.org/10.17159/2411-9717/2016/v116n4a3.
8. Tannont, D.D., & Regensburg, B. (2001). Guidelines for mine haul road design. School of Mining and Petroleum Engineering, Department of Civil and Environmental Engineering, University of Alberta. 1-115. https://doi.org/10.14288/1.0102562.
9. The Philippines in the natural rubber global value chain (2018). Policy briefs. Department of Trade and Industry. Series No. 2018-01, 1-8. Retrieved from https://dtiwebfiles.s3.ap-southeast-1.amazonaws.com/uploads/2019/11/2018-01-The-Philippines-in-the-Natual-Rubber-Global-Value-Chain.pdf.
10. Saving forest at risk. WWF living forest report (2015). Chapter 5. Retrieved from https://files.worldwildlife.org/wwfcmsprod/files/ Publication/file/5k667rhjnw_Report.pdf.
11. Cutler, T. (2016). Dangerous misconceptions about earthmover tyre explosions. Technical bulletin, 2. Retrieved from http://otrglobal.com.au/wp-content/uploads/2017/01/OTRG-Technical-bulletin-Tyre-explosion-misconceptions.pdf.
12. Salehi, M., Cornish, K., Bahmankar, M., & Naghavi, M.R. (2021). Natural rubber-producing sources, systems, and perspectives for breeding and biotechnology studies of Taraxacum kok-saghyz. Industrial Crops and Products, 170, 113667. https://doi.org/10.1016/j.indcrop.2021.113667.
13. Xiang, K.-L., Xiang, P.-Y., & Wu, Y.P. (May 2014). Prediction of the fatigue life of natural rubber composites by artificial neural network approaches. Materials & Design, 57, 180-185. https://doi.org/10.1016/j.matdes.2013.12.044.
14. Kravchenko, A., Sanko, O., & Lukichov, A. (2012). Research of dynamics of tire wear of trucks and prognostication of their service life. Transport Problems, 7(4), 85-94. ISSN: 1896-0596.
15. Nuri, A., & Nuri, S. (2019). Numerical modeling of transport roads in open pit mines. Journal of Sustainable Mining, 18(1), 25-30. https://doi.org/10.1016/j.jsm.2019.02.005.
16. Soofastaei, A., Knights, P., & Kizil, M. (2017). Application of advanced data analytics to improve haul trucks energy efficiency in surface mines. In Extracting Innovations, 164-177. https://doi.org/10.1201/b22353-12.
17. Yarmuch, J.L., Brazil, M., Rubinstein, H., & Doreen,A.T. (2019). Optimum ramp design in open pit mines. Computers & Operations Research, 104739, 2-26. https://doi.org/10.1016/j.cor.2019.06.013.
18. Alexandrov, V., Vasilyeva, M., & Koptev, V. (2019). Effective power and speed of mining dump trucks in fuel economy mode. Journal of Mining Institute, 239, 556-563. https://doi.org/10.31897/pmi.2019.5.556.
19. Soofastaei, A., Aminossadati, S.M., Kizil, M.S., & Knights, P. (2016). A discrete-event model to simulate the effect of truck bunching due to payload variance on cycle time, hauled mine materials and fuel consumption. International Journal of Mining Science and Technology, 26(5), 745-752. https://doi.org/10.1016/j.ijmst.2016.05.047.
Newer news items:
- Influence of misalignment of connection of electrical machine shafts on the nature of electric power of the induction motor - 25/12/2022 02:37
- Determination of the deformation parameters of the steel reinforcing phase inside the aluminum matrix during hot rolling - 25/12/2022 02:37
- Minimization of dynamic changes in the tension of long products behind the outlet cage in rolling stock production in coils - 25/12/2022 02:37
- Approximation of blades of radial machines with multiparameter family of smooth surfaces - 25/12/2022 02:37
- The influence of fissured material on tunnel stability (a numerical study) - 25/12/2022 02:37
- Taxonomy on the production processes and characterization of powder metallurgy used in additive manufacturing process - 25/12/2022 02:37
- Numerical study on deformation around underground mining structures (Algeria) - 25/12/2022 02:37
- Substantiation of research results on energy efficiency of basalt crushing - 25/12/2022 02:37
- Research on the rational profile of exit trails of auto transport in deep open mines - 25/12/2022 02:37
- Determining the parameters of stratification cavity in rock mass to extract mine methane - 25/12/2022 02:37
