A complex source of electrical energy for three-phase current based on a stand-alone voltage inverter

User Rating:  / 0
PoorBest 

Authors:

G.G.Pivnyak, Acad. of the NAS of Ukraine, Dr. Sc. (Tech.), Prof., orcid.org/0000-0002-8462-2995, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

O.O.Beshta, orcid.org/0000-0001-6397-3262, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2020, (1):89-93
https://doi.org/10.33271/nvngu/2020-1/089

 повний текст / full article



Abstract:

Purpose. To substantiate the operability of a combined power source of asynchronous electric drive of a vehicle, consisting of two power sources and one autonomous voltage inverter, to establish operating modes using zero combinations of inverter keys and to formulate a condition for energy transfer to an electromechanical converter from an additional power source.

Methodology. In the study on the work of an autonomous voltage inverter with two power sources, methods of mathematical and simulation modeling were used. To select the optimal method for implementing the control algorithm, a comparative analysis method and an analysis of a symmetric power system were applied.

Findings. The efficiency of the asynchronous motor power system from one autonomous voltage inverter with two power sources is proved. The paper presents mathematical calculations for constructing an electromechanical circuit, a modified algorithm for switching the keys of an inverter of a combined power source is given; physical processes are described.

Originality. The conditions of energy transfer to the electromechanical converter from an additional power source are formulated, which are provided by the choice of the load circuit parameters of the EMF of the additional source and increase the voltage component and the load capacity of the electromechanical converter.

Practical value. The electromechanical circuit of the vehicle’s asynchronous electric drive has been simplified due to the combined power supply, consisting of two power supplies and one autonomous voltage inverter. One of the sources is an additional source that is connected to the electric motor through the connection circuit to the zero point of the stator motor windings and the “negative” terminal of the autonomous voltage inverter and includes a DC-DC inverter, diode, inductor and discharge resistor.

References.

1. Salari, O., Hashtrudi Zaad, K., Bakhshai, A., & Jain, P. (2018). Hybrid Energy Storage Systems for Electric Vehicles: Multi-Source Inverter Topologies. In14th International Conference on Power Electronics (CIEP), 24–26 Oct. 2018, Cholula, Mexico. https://doi.org/10.1109/CIEP.2018.8573377.

2. Neuburger, M., & Haag, J. (2015). Photovoltaik im Elektrofahrzeug. Forschungsreport für die Elektrotechnik in Baden Württemberg 2014, 14-17. ISSN 2199-4889.

3. Pirienko, S., Neuburger, M., Ammann, U., Thrimawithana, D. J., Balakhontsev, A., & Cheng, P.-W. (2018). Evaluation of the small-scale wind turbine converter’s efficiency built with various types of semiconducting devices. In IEEE 3 rd International Conference on Intelligent Energy and Power Systems, 4, December 2018, (pp. 166-171). https://doi.org/10.1109/IEPS.2018.8559517.

4. Beshta, A., Aziukovskyi, O., Balakhontsev, A., & Shestakov, A. (2017). Combined power electronic converter for simultaneous operation of several renewable energy sources. InInternational Conference on Modern Electrical and Energy Systems (MEES), 28 June 2017, (pp. 236-239). Kremenchuk, Ukraine. https://doi.org/10.1109/MEES.2017.8248898.

5. Beshta, A., Sr., Balakhontsev, A., & Khudolii, S. (2019). Performances of Asynchronous Motor within Variable Frequency Drive with Additional Power Source Plugged via Combined Converter. In 6th IEEE International Conference on Energy Smart Systems, ESS 2019. 17–19 April 2019, (pp. 156-160). Kyiv; Ukraine. https://doi.org/10.1109/ESS.2019.8764192.

6. Beshta, O. O., Khudolii, S. S., Neuburger, M., & Neuberger, N. (2019). Control of energy flows in electric drivetrain of electric vehicle with extra DC source. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (2), 67-71. https://doi.org/10.29202/nvngu/2019-2/12.

7. Shchur, I., & Biletskyi, Y. (2018). Battery Currents Limitation in Passivity Based Controlled Battery/Supercapacitor Hybrid Energy Storage System. Supercapacitor Hybrid Energy Storage System. In Proc. 38 th IEEE Int. Conf. on Electronics and Nanotechnology (ELNANO-2018), April 24–26, 2018, (pp. 504-510). Kyiv, Ukraine. https://doi.org/0.1109/ELNANO.2018.8477477.

8. Shchur, I., Rusek, A., & Mandzyuk, M. (2015). Power effective work of PMSМ in electric vehicles at the account of magnetic saturation and iron losses. Przegląd Elektrotechniczny (Electrical Review), (1), 199-202. https://doi.org/10.15199/48.2015.01.45.

9. Shapoval, I. A., Mykhalskyi, V. M., & Doroshenko, A. L. (2017). Speed control of the doubly-fed induction machine with controlled converters in the stator and rotor circuits. Tekhnichna elektrodynamika, (6) 18-25. https://doi.org/10.15407/techned2017.06.018.

10. Mykhalskyi, V. М., Sobolev, V. M., Chopyk, V. V., & Sha­po­val, I. А. (2018). Simulation of the electric power generation system on the basis of dfig with active filtering capabilities and reactive power compensation. Tekhnichna elektrodynamika, (5), 52-56. https://doi.org/10.15407/techned2018.05.052.

Visitors

6226954
Today
This Month
All days
786
53631
6226954

Guest Book

If you have questions, comments or suggestions, you can write them in our "Guest Book"

Registration data

ISSN (print) 2071-2227,
ISSN (online) 2223-2362.
Journal was registered by Ministry of Justice of Ukraine.
Registration number КВ No.17742-6592PR dated April 27, 2011.

Contacts

D.Yavornytskyi ave.,19, pavilion 3, room 24-а, Dnipro, 49005
Tel.: +38 (056) 746 32 79.
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
You are here: Home Home EngCat Archive 2020 Content №1 2020 A complex source of electrical energy for three-phase current based on a stand-alone voltage inverter