Comprehensive solution of recycling waste from stone processing industry

User Rating:  / 2
PoorBest 

Authors:

А.O.Bondarenko, Dr. Sc. (Tech.), Prof., orcid.org/0000-0002-7666-6752, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

R.P.Naumenko, Cand. Sc. (Econ.), orcid.org/0000-0002-2796-1771, Zhytomyr Regional State Administration, Zhytomyr, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Abstract:

Purpose. Development of integrated technological solutions for utilization, accumulation and processing of wastes of the stone-processing industry with the production of marketable products with commercial value.

Methodology. Technological solutions have been applied for separate utilization, transportation, storage and processing of granular waste of the stone-processing industry in accordance with their initial size.

Findings. The technological rationality of separate delivery and warehousing to temporary warehouses in the form of storage pits no more than 2.5 m high (with site arrangement between them of large-scale waste rubbish and medium and small stone cuttings) by specialized dump trucks equipped with grabbing petrol buckets and dump-shaped reinforced bodies is substantiated. The technology of the preparation of oversized raw materials for further grinding using crushing equipment on a mobile chassis is described, using hydraulic hammers as a hydraulic excavator attachment. The rationality of the application of the technology for the collection, transportation and drainage of primary sludge by means of specialized automobile chassis-slurry trucks equipped with a mobile slurry container was substantiated. The peculiarities of two-stage processing of primary sludge і considered with the provision of their drainage first in Mobile Slurry Containers, then on secondary drainage sites and final cleaning from fine-dispersed impurities and the receipt of the commercial product in the form of artificial sand by washing. As a result of experimental and industrial testing and testing of the technology of the mobile slurry container filling, the technological rationality of the use of mobile slurry containers is determined.

Originality. For the first time, a technology of recycling and two-stage sequential processing of primary sludges, which are man-made waste of stone-making production with deriving a commercial product in the form of artificial sand, is developed.

Practical value. Research and industrial testing of the technology of the mobile slurry container filling with sludge with the subsequent washing of the drained granular material has been performed. The performed research studies allowed quantifying the technological rationality of two-stage processing of primary sludge using mobile slurry containers and gravity hydraulic classifiers.

References.

1. State Research and Development enterprise “State Information Geological Fund of Ukraine” (n.d.). Mineral Resources of Ukraine. Non-metallic mineral resources for construction. Retrieved from http://geoinf.kiev.ua.

2. Bobovich, B.B., & Deviatkin, V.V. (2000). Processing wastes from production and consumption: reference book. Moscow: Intemet Engineering. Retrieved from https://www.twirpx.com/file/871095.

3. Konev, V. (2013, April 17). Glare of ilmenite and poverty of Zhytomershchyna. Ekho. Zhytomyr Region social and business newspaper.

4. Nadutyi, V., Tytov, O., & Cheberiachko, I. (2018). Hereditary model of loose mined rock layer deformation in disintegrators. In Ukrainian School of Mining Engineering E3S Web Conf., 60. DOI: 10.051/e3sconf/20186000033.

5. DPI Kryvbasproekt (2013). СОУ-Н МПП 73.020-078-3:2013 norms of technological design of mining enterprises with open-pit mining. Retrieved from http://online.budstandart.com/ua/catalog/doc-page?id_doc=66948.

6. Jamil, S.H., Sukharyev, V.V., & Kostyrya, S.V. (2015). Complex Dehydration of the Rock Mass. International Journal of Engineering and Science, 5(9), 7-10.

7. Bondarenko, A.A. (2018). Theoretical bases of pulp suction process in the shallow dredge underwater face. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 3, 22‒29. DOI: 10.29202/nvngu/2018-3/4.

8. Bondarenko, A.A. (2018). Modeling of interaction of inclined surfaces of a hydraulic classifier with a flow of solid particles. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 4, 13-20. DOI: 10.29202/nvngu/2018-4/5.

9. Franchuk, V.P., & Bondarenko, A.A. (2016). Horizontal classifiers. Fundamentals of theory and calculation. Dnipro: National mining university.

10. Bliuss, B.A., Semenenko, Ye.V., Medvedeva, O.A. (2016). Technology of reconstruction of accumulating capacity of enrichment rejects storages. Modern resource-energy-saving technology of mining, 1(17), 72–80.

11. Bliuss, B.A., Semenenko, Ye.V., & Medvedeva, O.A. (2017). Methods for managing parameters of technogenic deposits while warehousing thick pulps of enrichment rejects. Modern resource-energy-saving technology of mining, 2(20), 71-80.

12. Kolosov, D., Dolgov, O., & Kolosov, A. (2014). Analytical determination of stress-strain state of rope caused by the transmission of the drive drum traction. In Progressive Technologies of Coal, Coalbed Methane, and Ores Mining (pp. 499-504).

13. Kolosov, D., Dolgov, O., Bilous, O., & Kolosov, A. (2015). The stress-strain state of the belt in the operating changes of the burdening conveyor parameters. In New Developments in Mining Engineering 2015: Theoretical and Practical Solutions of Mineral Resources Mining (pp. 585-590).

14. Pivnyak, G., Samusia, V., Oksen, Y., & Radiuk, M. (2014). Parameters optimization of heat pump units in mining enterprises. In Progressive Technologies of Coal, Coalbed Methane, and Ores Mining (pp. 19-24).

15. Iljin, S., Samusya, V., Iljina, I., & Iljina, S. (2015). Influence of dynamic processes in mine winding plants on operating safety of shafts with broken geometry. In New Developments in Mining Engineering 2015: Theoretical and Practical Solutions of Mineral Resources Mining (pp. 425-429).

 

 повний текст / full article



Visitors

2920649
Today
This Month
All days
8
22903
2920649

Guest Book

If you have questions, comments or suggestions, you can write them in our "Guest Book"

Registration data

ISSN (print) 2071-2227,
ISSN (online) 2223-2362.
Journal was registered by Ministry of Justice of Ukraine.
Registration number КВ No.17742-6592PR dated April 27, 2011.

Contacts

D.Yavornytskyi ave.,19, pavilion 3, room 24-а, Dnipro, 49005
Tel.: +38 (056) 746 32 79.
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
You are here: Home Home EngCat Archive 2019 Contens №4 2019 Environmental Safety, Labour Protection Comprehensive solution of recycling waste from stone processing industry