The study on the flows kinematics in the jet pump’s mixing chamber

User Rating:  / 1
PoorBest 

Authors:

Ye.I.Kryzhanivskyi, Academ. of NAS of Ukraine, Dr. Sc. (Tech.), Prof., orcid.org/0000-0001-6315-1277, State Higher Educational Institution “Ivano-Frankivsk National Technical University of Oil and Gas”, Ivano-Frankivsk, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.

D.O.Panevnyk, orcid.org/0000-0002-7853-5051, State Higher Educational Institution “Ivano-Frankivsk National Technical University of Oil and Gas”, Ivano-Frankivsk, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.

Abstract:

Purpose.To improve the simulation method of kinematic parameters distribution for mixed flows in a flowing part of a downhole jet pump.

Methodology. There is developed an analytical model for distribution of flow kinematic parameters in the mixing chamber of a downhole jet pump as potential flows and the turbulent layer between them with an uneven velocity profile, which is approximated using basic functions. Integrated analysis techniques for interaction of asymmetric flooded turbulent jets are applied during simulation.

Findings. There is analyzed a structure of the flow at the mixing chamber inlet of the jet pump by applying the theory of a flooded jet of fluid that moves in the accompanying flow. A possibility of simulating the process of the jet pump mixing is presented. There is also shown a possibility of simulating the mixing process of coaxial flows as self-similar velocities profiles of potential and shear flows of the variable section with a three-layer structure. There is accepted a uniform velocity profile for the areas of potential flows while a non-linear profile is accepted for the shear flow, placed between them. These profiles retain an approximate self-similarity during the entire initial area of a submerged jet. Integration of the accepted velocity profile with regard to the conditions of the transition between potential and shear flows allows determining the uneven distribution of kinematic parameters for mixed flows in a flowing part of a downhole jet pump.

Originality. The novelty of this research article is to establish the relationship between self-similar velocities profiles of potential and shear flows of the variable structure, boundaries of the mixed flows and mutual orientation of elements in a flowing part of the jet pump.

Practical value. The presented method for estimating the unevenness of the velocity profile in the mixing chamber of the jet pump allows taking into account the design and operational characteristics of the well bore ejection system when designing the distribution of kinematic parameters of the mixed streams. The established relationship between uneven distribution of velocities and the ratio of flows to mixed streams, geometric sizes and mutual orientation of elements can be used for designing structures and predicting the operating conditions of the well borehole pump.

References.

1. Yong, H., Lihong, Z., Deyong, Z., Hualin, L., Jinying, W., Jinshen, Y., Yugang, Z. and Zhibin, W., 2016. Study on structure parameters of reverse circulation drill bit secondary injector device based on injector coefficient. In: Proc. IADC/SPE Asia Pacific Drilling Technology Conference, Singapore. August 22‒24. DOI: 10.2118/180539-MS.

2. Syed, M. P., Najam, B. and Sacha, S., 2014. Surface jet pumps enhance production and processing. Journal of Petroleum Technology, 66(11), pp. 134‒136.

3. Leagas, T., Seefeldt, G. and Hoon, D., 2016. Ejector Technology for efficient and cost effective flare gas re­covery. In: Proc. GPA-GCC 24th Annual Technical Conference, Kuwait City [online], May 10‒11, 10 p. Available at: <https://www.zeeco.com/.../GPA-Kuwait-Final-Paper-2016.pd.> [Accessed 24 November 2017].

4. Mohammed, S. K., 2016. The experience of using jet pumps with hydraulic pumping bottom-hole assemblies to reactivate Idle Wells in a heavy oil reservoir in the East Soldado field. In: Proc. SPE Trinidad and Tobago Section Energy Resources Conference, Port of Spain. June 13‒15 [online]. Available at: <https://www.onepetro.org/conference-paper/SPE-180799-MS> https://www.zeeco.com/.../GPA-Kuwait-Final-Paper-2016.pd.> [Accessed 8 October 2017].

5. Zhao, S. and Sakuragi, S., 2018. Performance improvement of underwater jet pump by optimal arrangement of primary jet stream. Journal of Fluid Science and Technology, 13(1), 11 p. DOI: 10.1299/jfst.2018jfst0004.

6. Panevnyk, D. O. and Velichkovich, A. S., 2017. Assessment of the stressed state of the casing of the abovebit hydro-elevator. Neftyanoe Khozyaistvo, 1, pp. 70‒73.

7. Yao, D., Lee, K., Ha, M., Cheong, C. and Lee, I., 2018. Development of Hybrid Airlift-Jet Pump with its Performance Analysis. Applied Science, 8, pp. 1‒18 .

8. Sheha, A. A. A., Nasr, M., Hosien, M. A. and Wahba, E. M., 2018. Computational and experimental study on the water-jet pump performance. Journal of Applied Fluid Mechanics, 11(4), pp. 1013‒1020.

9. Zhu, H.-Y., Liu, Q.-Y. and Wang, T., 2014. Reducing the bottom-hole differential pressure by vortex and hydraulic jet methods. Journal of Vibroengineering, 16(5), pp. 2224‒2249.

10. Aldas, K. and Yapici, R., 2014. Investigation of effects of scale and surface roughness on efficiency of water jet pumping CFD. Engineering Applications of Computational Fluid Mechanics, 8(1), pp. 14‒25.

 повний текст / full article



Visitors

2861177
Today
This Month
All days
213
14004
2861177

Guest Book

If you have questions, comments or suggestions, you can write them in our "Guest Book"

Registration data

ISSN (print) 2071-2227,
ISSN (online) 2223-2362.
Journal was registered by Ministry of Justice of Ukraine.
Registration number КВ No.17742-6592PR dated April 27, 2011.

Contacts

K. Marks Ave. 19, pavilion 3, room 24-а,
Dnipropetrovsk, 49000
Tel.: 47-45-24
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

You are here: Home Home EngCat Archive 2019 Contens №1 2019 Geotechnical and mining mechanical engineering, machine building The study on the flows kinematics in the jet pump’s mixing chamber