Creation of effective metallic thermal insulation constructions

User Rating:  / 0
PoorBest 

Authors:

A.A. Cheilytko, Candidate of Technical Science, Associate Professor, orcid.org/0000-0002-5713-155X, Zaporizhzhia State Engineering Academy, Doctoral Candidate of Department of Heat and Power Engineering, Zaporizhzhia, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

S.V. Ilin, Candidate of Technical Science, orcid.org/0000-0003-3563-9536, Zaporizhzhia State Engineering Academy, Associate Professor of the Department of Heat and Power Engineering, Zaporizhzhya, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

M.A. Nosov, orcid.org/0000-0002-8772-4313, Zaporizhzhia State Engineering Academy, Postgraduate Student of Department of Heat and Power Engineering, Zaporizhzhya, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

Abstract:

Purpose. Creation of the heat-insulating structure (based on perforated metal plates set), which has simple manufacturing, optimal thermal and physical properties, and also allows using structural elements both from one material and a combination of different ones.

Methodology. The empirical laboratory studies of the proposed thermal insulation structure with varying of the pore size and the distance between them were conducted. The regression equation was constructed by the method for planning the experiment. The Student's t-test and Fisher's adequacy test were used for the statistical processing of the data. The Lagrange method with the Kuhn-Tucker conditions was used for finding the objective function minimum.

Findings. Dependence of the strength and effective thermal conductivity in the insulating material structure on the maximum pore diameter, and the distance between pore edges was found. An objective function on the basis of minimum heat conductivity and compressive strength of at least 100 MPa was received. The optimum plate perforation dimensions, at which the thermal conductivity is equal to 20.7686 W/(m·K) and the compressive strength equals to 100.235 MPa, were determined.

Originality. The optimal geometric parameters of the perforated plate set, for their use as elements of power equipment thermal protection, were determined. The thermal conductivity coefficient and hardness factor of the obtained material were found.

Practical value. A thermal insulation structure consisting of a metal plate set was proposed. The obtained metal thermal insulation can be used in different areas, among which are aircraft construction; rocket engineering; automotive and nuclear industry. Such a wide range of applications is due to a combination of thermo-physical and strength characteristics. The ability to use a variety of metals, whether they involve titanium for hulls in rocket construction or zirconium to isolate the core of a nuclear reactor is also important. The usage of this insulation structure instead of monolithic parts will lead to a decrease in total weight; heat losses and material costs.

Reference

1. Krushenko, G. G., 2012. Manufacture and application of porous metallic materials in engineering. Vestnik Sibirskogo gosudarstvennogo aerokosmicheskogo universiteta imeni akademika M. F. Reshetneva, 5(45), pp. 181‒184.

2. Hanus, A., Lichý, P. and Bednářová, V., 2012. Produc­tion and properties of cast metal with a porous. In: 21st International Conference on Metallurgy and Materials. Brno, 23–25 May 2012 [online]. Available at: <http://metal2013.tanger.cz/files/ proceedings /02/reports/464.pdf> [Accessed 23 July 2016].

3. Shaik Dawood, A. K. and Karuppusami, G., 2012. A New Method for Production of Porous Aluminum Castings. Advanced Design and Manufacturing Technology, 5(3), рр. 9‒13.

4. Sereda, B., Belokon', Y., Zherebtsov, A. and Sereda, D., 2012. The researching and modeling of physical-chemical properties of Ni-base alloys in SHS conditions. In: Mate­rials Science and Technology Conference and Exhibi­tion 2012, MS and T. [online]. Available at: <http://toc. pro-ceedings.com/16632webtoc.pdf> [Accessed 23 July 2016].

5. Lichy, P., Bednarova, V. and Elbel, T., 2012. Casting routes for porous metals production. Archives of foundry engineering, 12(1), рр. 71‒74.

6. Bednářová, V., Lichý, P., Elbel, T. and Hanus, A., 2014. Cast cellular metals with regular and irregular structures. Materiali in tehnologije, 48, pp. 175–179.

7. Joseph R. Vargas and Steven J. Seelman, Zimmer, Inc., 2014. Micro-alloyed porous metal having optimized chemical composition and method of manufacturing the same. US8734514 B2 [online]. Available at: <https://www.google.com/patents/US8734514> [Accessed 23 July 2016].

8. Kennedy, A., 2012. Porous metals and metal foams made from powders, powder metallurgy. InTech. Powder Metallurgy. pp. 31–46. ISBN: 978-953-51-0071-3 [online]. Available at: <http://www.intechopen.com/books/powder-metallurgy/the-manufacture-of-porous-and-cellular-metals-bypowder-metallurgy-processes> [Accessed 20 October 2016].

9. Pavlenko, A. M., Koshlak, A. V., Cheilytko, A. A. and Nosov, M. A., 2015. Influence of location of pores on the electronic thermal conductivity in porous metal material. Tekhnichna teplofizyka ta promyslova teploenerhetyka, 7, pp. 142–149.

10. Nakajima, H., 2013. Porous Metals with Directional Pores. http://dx.doi.org/ 10.1007/978-4-431-54017-5_7.

11. Cheiytko, A. A. and Pavlenko, A.M., 2013. Swelling of the porous siliceous material. Saarbrucken: LAP LAMBERT Academic Publishing. ISBN 978–3–659–46789–9.

 

 повний текст / full article



Visitors

2051174
Today
This Month
All days
17
21604
2051174

Guest Book

If you have questions, comments or suggestions, you can write them in our "Guest Book"

Registration data

ISSN (print) 2071-2227,
ISSN (online) 2223-2362.
Journal was registered by Ministry of Justice of Ukraine.
Registration number КВ No.17742-6592PR dated April 27, 2011.

Contacts

K. Marks Ave. 19, pavilion 3, room 24-а,
Dnipropetrovsk, 49000
Tel.: 47-45-24
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

You are here: Home Home EngCat Archive 2017 Contents №6 2017 Geotechnical and mining mechanical engineering, machine building Creation of effective metallic thermal insulation constructions