Automation of the control process of the mining machines based on fuzzy logic

User Rating:  / 1
PoorBest 

Authors:

A.V.Bublikov, Cand. Sc. (Tech.), Assoc. Prof., orcid.org/0000-0003-3015-6754, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.

V.V.Tkachov, Dr. Sc. (Tech.), Prof., orcid.org/0000-0002-2079-4923, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.

Abstract:

Purpose. To improvethe efficiency of mining equipment functioning through the introduction of fuzzy inference algorithms into the control of mining facilities being complex objects with dynamic, randomly varied operation modes.

Methodology. A stage to determine nonfuzzy input variable systems as statistic indices has been added to universally accepted algorithm of a fuzzy interference. The indices make it possible to identify operation mode of mining equipment or operation mode transitions. Each input nonfuzzy variable of the system is a result of statistic processing of information signals from the sensors to find unique regularities within the signal; the regularities should correspond to one or several operation modes of the machine, or transitions between them. Additional linguistic input variables of “Previously, their operation mode was…” are introduced to trace temporally varied operation modes of the mining machine. Taking into consideration features of input nonfuzzy variables formation, the system performs fuzzy inference discretely in time; in this context, fuzzy inference interference algorithm is added by the conditions for data accumulation, variations, and zero variations in the machine operation mode.

Findings. A technique to integrate a behavioural model of a mining machine, considered as a control object, into a fuzzy inference algorithm has been proposed. Moreover, recommendations, concerning determination of both nonfuzzy and linguistic input variables of the system, formation of a basis of fuzzy products, and determination of conditions for data accumulation have been formulated.

Originality. Originality of the proposed technique is to use a behavioural model of a mining machine, considered as a control object, for the fuzzy inference algorithm in the form of a set of operation modes of a machine and in the form of a scheme of time-dependent changes in operation modes.

Practical value. The proposed technique istheoretical basis to solve topical scientific and application problem as well as to use nonfuzzy algorithms to control mining machines to improve their efficiency.

References.

1. Taran, I., & Klymenko, I. (2017). Analysis of hydrostatic mechanical transmission efficiency in the process of wheeled vehicle braking. Transport Problems, 12, 45-56.

2. Sustainable Intelligent Mining Systems. European Commission: European Innovation Partnership on Raw Materials[n.d.]. Retrieved from https://ec.europa.eu/growth/tools-databases/eip-raw-materials/en/content/sustainable-intelligent-mining-systems.

3. Korniienko, V. I., Matsiuk, S. M., Udovyk, I. M., & Aleksieiev, O. M. (2016). Method and algorithms of nonlinear dynamic processes identification. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 1, 98-103.

4. Babets, D. (2018). Rock mass strength estimation using structural factor based on statistical strength theory. Solid State Phenomena, 277, 111-122 DOI: 10.4028/www.scientific.net/ssp.277.111.

5. Stadnik, M., Semenchenko, D., Semenchenko, A., Belytsky, P., Virych, S., & Tkachov,V. (2019). Improving energy efficiency of coal transportation by adjusting the speeds of a combine and a mine face conveyor, EasternEuropean Journal of Enterprise Technologies, 1/8(97), 60-70. DOI: 10.15587/1729-4061.2019.156121.

6. Syrotkina, O., Alekseyev, M., & Aleksieiev, O. (2017). Evaluation to determine the efficiency for the diagnosis search formation method of failures in automated systems, EasternEuropean Journal of Enterprise Technologies, 88, 59-68. DOI: 10.15587/1729-4061.2017.108454.

7. Stadnik, N., Kondrakhin, V., & Tokar, L. (2013). Two-propulsion travelling mechanisms of shearers for thin beds. Energy Efficiency Improvement of Geotechnical Systems. Proceedings of the International Forum on Energy Efficiency, (pp. 203-215).

8. Bublikov, A., Gruhler, G., Gorlach, I., & Cawood, G. (2015). Control strategy for a mobile platform with an omni-directional drive. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 2(146), 84-90.

9. Kupin, A., & Senko, A. (2015). Principles of intelligent control and classification optimization in conditions of technological processes of beneficiation complexes. CEUR Workshop Proceedings, 1356, 153-160.

10. Lakhno, V., Zaitsev, S., Tkach, Y., & Petrenko, T. (2018). Adaptive expert systems development for cyber attacks recognition in information educational systems on the basis of signs’ clustering. Advances in Computer Science for Engineering and Education. ICCSEEA 2018. Advances in Intelligent Systems and Computing, 754, 673-682. DOI: 10.1007/978-3-319-91008-6_66.

11. Morkun, V., Tron, V., & Paranyuk, D. (2017). Neuro-fuzzy identification of drilling control system adapted to rock types. IEEE International Young Scientists Forum on Applied Physics and Engineering, YSF (pp.12-16). DOI: 10.1109/ysf.2017.8126584.

12. Kolosov, D., Bilous, O., Tantsura, H., & Ony­shchen­ko, S. (2018). Stress-Strain State of a Flat Tractive-Bearing Element of a Lifting and Transporting Machine at Operational Changes of its Parameters. Solid State Phenomena, 277, 188-201. DOI: 10.4028/www.scientific.net/SSP.277.188.

13. Sdvyzhkova, O., & Patyńska, R. (2016). Effect of increasing mining rate on longwall coal mining - Western Donbass case study. Studia Geotechnica et Mechanica, 38, 91-98.

14. Tkachov, V., Bublikov, A., & Gruhler, G. (2015). Automated stabilization of loading capacity of coal shearer screw with controlled cutting drive. New Developments in Mining Engineering 2015: Theoretical and Practical Solutions of Mineral Resources Mining (pp. 465-477).

15. Tkachov, V., Bublikov, A., & Isakova, M. (2013). Control automation of shearers in terms of auger gumming criterion. Energy Efficiency Improvement of Geotechnical Systems. Proceedings of the International Forum on Energy Efficiency (pp. 137−145).

 повний текст / full article



Visitors

6229369
Today
This Month
All days
3201
56046
6229369

Guest Book

If you have questions, comments or suggestions, you can write them in our "Guest Book"

Registration data

ISSN (print) 2071-2227,
ISSN (online) 2223-2362.
Journal was registered by Ministry of Justice of Ukraine.
Registration number КВ No.17742-6592PR dated April 27, 2011.

Contacts

D.Yavornytskyi ave.,19, pavilion 3, room 24-а, Dnipro, 49005
Tel.: +38 (056) 746 32 79.
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
You are here: Home Cooperation Partners EngCat Archive 2019 Contens №3 2019 Information Technologies Automation of the control process of the mining machines based on fuzzy logic