Vibrational-centrifugal surface strengthening of drill and casing pipes

User Rating:  / 0
PoorBest 

Authors:

I.S.Aftanaziv, Dr. Sc. (Tech.), Prof., orcid.org/0000-0003-3484-7966, Lviv Polytechnic National University, Lviv, Ukraine e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

L.I.Shevchuk, Dr. Sc. (Tech.), Prof., orcid.org /0000-0001-6274-0256, Lviv Polytechnic National University, Lviv, Ukraine e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

L.R.Strutynska, Cand. Sc. (Tech.), Assoc. Prof., orcid.org/0000-0002-0401-5475, Lviv Polytechnic National University, Lviv, Ukraine e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

O.I.Strogan, Cand. Sc. (Tech.), orcid.org/0000-0002-1790-6736, Lviv Polytechnic National University, Lviv, Ukraine e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Abstract:

Purpose. Development of new constructions of devices for strengthening drill and casing pipes by surface plastic deformation, determination of constructive and technological parameters of vibrational-centrifugal strengthening of long-length parts.

Methodology. Based on the theory of static similarities of fatigue failure, methods for defining decreased mass and consumption of materials for cylindric parts as a result of effective strengthening of their outer and inner cylindric-shaped surfaces by vibrational-centrifugal treatment are suggested.

Findings. Based on the experience of industrial use of vibrational-centrifugal treatment for strengthening plane wheel hubs and flanges, new constructive schemes of genuine devices for strengthening drill and casing pipes of exploration wells have been developed. To and durability of drill and casing pipes of exploration wells and to, The vibrational-centrifugal strengthening treatment is expedient to use during the final stage of pipes production with the purpose of increasing their reliability as well as decreasing their mass. This strengthening technology belongs to the group of dynamic methods of surface plastic deformation, features ability to dissipate considerable energy of deformation of strengthened part material in its surface layers which is equal to that of stamping. For parts made of construction steel, the vibrational-centrifugal strengthening treatment provides for the thickness of the strengthened layer within 0.15‒0.20 mm, formation of residual compressive stresses of high gradient, enhanced micro-hardness. Due to technological use of considerable inertial forces of massive strengtheners, which are rolled over the surface during the strengthening process, effective reinforcement of metal of the surface processed and formation of residual stress in their metal thickness are provided. This effective strengthening of both inner and outer long surfaces allows decreasing the mass of long-length steel parts by 15‒20 %. This provides for certain economic effect related to cost of part material. For the first time, structural schemes of equipment for strengthening outer and inner cylindric-shaped surfaces of long-length parts through vibrational-centrifugal treatment have been described, including those for drill and casing pipes. The suggested constructions of strengthening equipment have a simple constructive design, do not require first line maintenance workers, and are effective and energy-efficient.

Originality. The developed designs of devices for strengthening long outer and, particularly, inner surfaces of cylindric long-length parts have no comparable counterparts internationally. Due to these designs, the spheres of effective use of surface strengthening increase considerably.

Practical value. Material capacity of long-length parts strengthened by the suggested design of strengthening equipment decreases. On a 2‒3-kilometer exploration well, the decrease in the drill string mass by 15‒20 % as a result of strengthening treatment will allow saving about 30‒40 tons of costly constructional steel. Wide industrial application of the vibrational-centrifugal strengthening and the suggested equipment for its implementation will also allow increasing reliability and durability of a wide class of long-length parts.

References.

1. Lototska, O. I., 2008. Increasing performance characteristics of printing machine parts. Technology and Technique of Typography, 3‒4, pp. 16‒20. DOI: 10.20535/2077-7264.2(28).2010.56079.

2. Kusyi, Ya. M. and Kuk, A. M., 2015. Developing the method of vibrational-centrifugal strengthening for technical support of machine part reliability. Eastern-European Journal of Enterprise Technologies, 1/7(73), pp. 41‒51. DOI: 10.15587/1729-4061.2015.36336.

3. Shyrokov, V. V., Kusyi, Ya. M., Aftanaziv, I. S., Borovets, V. M. and Kuk, A. M., 2010. Developing techniques for improving performance characteristics of oil and gas equipment parts. In: 10th International Conference. Efficiency of implementing scientific, resource and industrial capacity in modern conditions. 2010. Slavske, Ukraine, pp. 243‒246. DOI: 10.15587/1729-4061.2015.36336.

4. Kusyi, Ya. M. and Topilnytskyi, V. H., 2013. Research on the quality of the surface of vibrationally-displaced machine parts. Visnyk Natsionalnoho Universytetu “Lvivska Politekhnika”. Series “Optimization of Production Processes and Engineering Control in Machine Building and Tool Engineering”, 772, pp. 196‒201.

5. Kusyj, Ya. and Topilnitskiyy, V., 2009. Calculatoions of vibratory-centrifugal strengthening treatment’s dynamics by means of application software. In: Book of abstracts XVII Polish-Ukrainian Conference on “CAD in Machinery Design-Implememtation and Educational Problems”, pp. 25‒26. DOI: 10.15587/2312-8372.2015.3767.

6. Kusyj, J., Kuk, A. and Topilnytskyy, V., 2018. Vibratory-centrifugal strengthening’s influence on failure-free parameters of drilling pumps bushings. Technology Audit and Production Reserves, 1(39), pp. 4‒12. DOI: 10.15587/2312-8372.2018.123838.

7. Aftanaziv, I. S. and Shevchuk, L. I., 2018. Device for strengthening inner cylinder-shaped surfaces of long-length parts by surface plastic deformation. Ukraine. Pat. 116268.

8. Kuzin, O., Kusyj, J. and Topilnytskyy, V., 2015. Influence of technological heredity on reliability parameters products. Technology Audit and Production Reserves, 1(21), pp. 15‒21. DOI: 10.15587/2312-8372.2015.37678.

9. Mironov, A. V. and Redreev, G. V., 2014. On strengthening the surface of parts by plastic deformation. Bulletin of Omsk State Agrarian University, 3(15), pp. 35‒38.

10. Kravchuk, V. S., Dashchenko, A. F. and Lymarenko, A. M., 2016. Grapho-analytical method for determining strengthening effect of machine parts strengthened by surface method. In: Collection of research papers of Odesa State Academy of Technical Regulation, pp. 79‒82.

11. Aftanaziv, I. S. and Shevchuk, L. I., 2018. Technique for strengthening inner cylinder-shaped surfaces of artillery gun tubes by surface plastic deformation. Ukraine. Pat. 116266.

 повний текст / full article



Visitors

6226941
Today
This Month
All days
773
53618
6226941

Guest Book

If you have questions, comments or suggestions, you can write them in our "Guest Book"

Registration data

ISSN (print) 2071-2227,
ISSN (online) 2223-2362.
Journal was registered by Ministry of Justice of Ukraine.
Registration number КВ No.17742-6592PR dated April 27, 2011.

Contacts

D.Yavornytskyi ave.,19, pavilion 3, room 24-а, Dnipro, 49005
Tel.: +38 (056) 746 32 79.
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
You are here: Home Cooperation Partners EngCat Archive 2018 Contents №5 2018 Geotechnical and mining mechanical engineering, machine building Vibrational-centrifugal surface strengthening of drill and casing pipes