- 1. Influence of particle geometry on the efficiency of operation of quasistatic and inertial disintegrators
- (Content №6 2020)
- ... 14. Sachuk, Yu.V., & Maksymuk, O.V. (2018). Computer modeling of elastic-plastic deformation in problems of contact interaction of canonical dies with a half-plane. Matematychne ta kompiuterne modeliuvannia. ...
- Created on 22 December 2020
- 2. Rational organization of the work of an electric vehicle maintenance station
- (Contens №5 2020)
- ... number and location of charging stations for electric vehicles in the city. Computer Modeling: Analysis, Control, Optimization, 1, 23-29. https://doi.org/10.32434/2521-6406-2019-5-1-23-29. 19. Pinedo, ...
- Created on 30 October 2020
- 3. Assessment of the individual risk of fatal injury to coal mine workers during collapses
- (Contens №4 2020)
- ... is justified. The complex method for effective control of mountain pressure is illustrated by application of the developed methodology of computer modeling of geomechanical processes, instrumental and ...
- Created on 30 August 2020
- 4. Energy-saving control for traction frequency-regulated asynchronous engine of an electric vehicle
- (Contens №6 2019)
- ... Methodology. Methods of variational calculus, Runge-Kutta, mathematical analysis and interpolation, computer modeling. Findings. Analytical dependencies are obtained to calculate the total ...
- Created on 23 December 2019
- 5. Energy-saving tachograms of acceleration (deceleration) of a frequency-regulated asynchronous engine
- (Electrical Complexes and Systems)
- ... interpolation and computer modeling are used. Findings. Analytic dependencies are obtained for calculating the total energy losses for a frequency-regulated asynchronous engine (FRAE) under conditions ...
- Created on 19 August 2019
- 6. Three-to-one phase converter's control method for power factor corrected power supply of resistance welding machine
- (Electrical Complexes and Systems)
- ... 2016 IEEE Energy Conversion Congress and Exposition (ECCE). DOI: 10.1109/ECCE.2016.7855274. 7. Kunov, G., Antchev, M. and Gadjeva, E., 2010. Computer Modeling of Three-Phase to Single-Phase Matrix ...
- Created on 27 August 2018
- 7. The influence of implementation of circular pipes in load-bearing structures of bodies of freight cars on their physico-mechanical properties
- (Geotechnical and mining mechanical engineering, machine building)
- ... рр. 49–56 [pdf]. Available at: http://transportproblems.polsl.pl/pl/Archiwum/2007/zeszyt3/2007t2z3_06.pdf [Accessed 15 October 2016]. 5. Lovska, A. A., 2015. Peculiarities of computer modeling ...
- Created on 11 January 2018
- 8. Dynamic and kinematic synthesis of the contour gear hobbing’s system
- (Geotechnical and mining mechanical engineering, machine building)
- ... with specified variations of interaction was determined in terms of computer modeling. A dynamic model of the tool cutting edge interaction with the machined surface has been created. The model considers ...
- Created on 24 July 2017
- 9. Evaluation of noise immunity of monoimmittance logic L-element “AND”
- (Information technologies, systems analysis and administration)
- ... developed. The computer modeling of such destabilizing factor dependences was done: the instability of wave resistance of the transmission line segments, the instability of the segment length of the transmission ...
- Created on 16 March 2017
- 10. Revisiting the underground gasification of coal reserves from contiguous seams
- (Mining)
- ... Using stand experimental research and methods of computer modeling we obtained the dependences of interstratial rocks subsidence in terms of their thickness change, alternating thickness of coal seams ...
- Created on 19 January 2017
- 11. Study of regularity of geomechanical processes development while developing deposits by the combined way
- (Mining)
- ... analytical calculations, processing observation results by methods of mathematical statistics and computer modeling. Findings. For safe and efficient extraction of gold, effects of natural and geotechnical ...
- Created on 30 September 2016
- 12. INFLUENCE OF HETEROGENEOUS CRYSTALLIZATION CONDITIONS OF ALUMINUM ALLOY ON ITS PLASTIC PROPERTIES
- (Solid-state physics, mineral processing)
- ... the Polygon system of computer modeling of casting processes (SCM CP). Findings. The effect of implementation of the combined technology of aluminum alloy refinement with TiCN ultrafine modifier and ...
- Created on 30 October 2015
- 13. Improvement of the central ejector efficiency under nonoptimal operating modes
- (Geotechnical and mining mechanical engineering, machine building)
- ... inzhenernoy practike [SolidWorks. Computer Modeling in Engineering Practice], VHV – Peterburg, St.-Petersburg, Russia. 4. Дунчевский Г.М. Гидравлический расчет гидроструйных насосов и систем. Теория, ...
- Created on 27 October 2015
- 14. Determination of parameters of intensive flat coal seams mining technology in the conditions of negative effect of mining operations on the daily surface
- (Mining)
- Authors: O.I. Kazanin, Dr. Sci. (Tech.), Professor, National University of Mineral Resources (University of Mines), Saint-Petersburg, Russia. M.G. Mustafin, Dr. Sci. (Tech.), Professor, National ...
- Created on 27 October 2015
- 15. Hydrodynamics of non-isothermal turbulent airflows in ducts of annular section
- (Geotechnical and mining mechanical engineering, machine building)
- ... – С. 185–188. 2. Alyamovskiy, A.A., Sobachkin, A.A. and Odintsov, Ye.V. (2005), Solid Works Kompyuternoye modelirovaniye v inzhenernoy praktike [Solid Works. Computer Modeling in Engineering Practice], ...
- Created on 29 March 2015
- 16. Evaluation of the adequacy of the statistical simulation modeling method while investigating the components presorting processes
- (Geotechnical and mining mechanical engineering, machine building)
- ... of the parameters of their presorting are developed. Practical value. On the basis of the developed mathematical models, the guidelines on the computer modeling using the method of Monte Carlo presorting ...
- Created on 13 November 2014
- 17. Estimation of geomechanical parameters of the “pair workings-pillar-working face” system
- (Mining)
- ... modelirovaniye v inzhenernoy praktike [SolidWorks. Computer modeling in engineering practice], BHV-Peterburg, St. Petersburg, Russia. 6. Hoek, E., Carranza-Torres, C. and Corkum, B. (2002), “Hoek-Brown ...
- Created on 11 May 2014
- 18. Peculiarities of rope bolts usage during maintenance of stopes in mines of Western Donbass
- (Mining)
- ... using computer modeling method”, Proceedings of ХХII World mining congress & Expo, Vol.1, September 11–16, 2011, Istanbul, pp. 267–278. ...
- Created on 17 October 2013
- 19. Mathematical model for mineral reserves evaluation
- (Geology)
- ... (PDMU-2005), Berdyansk. – 2005. – С. 107–109. Vlasiuk, A.P. and Lustiuk, M.G. (2005), “Mathematical and computer modeling evaluation of bulk minerals and process their output”, Abstracts of ...
- Created on 17 October 2013
- 20. About some features of run-updynamicof vibration machines with self-synchronizing inertion vibroexciters
- (Geotechnical and mining mechanical engineering, machine building)
- Authors: N.P. Yaroshevich, Dr. Sci. (Tech.), Lutsk State Technical University, Head of the Department of Forest Complex Equipment and Theory of Mechanisms and Machinery, Professor of the Department of ...
- Created on 13 August 2013