Articles

Using a phase-differential busbar protection for switchgears of power system facilities

User Rating:  / 0
PoorBest 

Authors:

D.O.Kulagin, Cand. Sc. (Tech.), Assoс. Prof., orcid.org/0000-0003-3610-4250, Zaporizhzhya National Technical University, Zaporizhzhia, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

D.V.Fedosha, Cand. Sc. (Tech.), Assoс. Prof., orcid.org/0000-0002-0683-0561, Zaporizhzhya National Technical University, Zaporizhzhia, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

V.V.Nitsenko, Cand. Sc. (Tech.), orcid.org/0000-0002-3450-7649, State Enterprise “National Power Energy Company “Ukrenerho”, Regional dispatching center of Dnipro region, Zaporizhzhia, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

S.Yu.Shevchenko, Dr. Sc. (Tech.), Assoс. Prof., orcid.org/0000-0002-9658-7787, National Technical University “Kharkiv Politechnical University”, Kharkiv, Ukraine, е-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

D.O.Danylchenko, orcid.org/0000-0001-7912-1849, National Technical University “Kharkiv Politechnical University”, Kharkiv, Ukraine, е-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Abstract:

Purpose. To develop a concept for the implementation of a more advanced device designed for the busbar protection of power plants and substations which has advantages in technical operation over its traditional analogs by applying the phase-differential principle of this protection.

Methodology. When developing the concept of implementation of phase-differential busbar protection, we used the method of comparative analysis, in particular, a qualitative analysis of the characteristics of busbar protection was carried out; difficulties encountered in the operation of traditional differential protection as well as advantages that can be obtained by introducing phase-differential protection were considered in the work.

Findings. Based on many years’ experience in the operation of differential current protection at power system facilities, the problematic issues of its operation are identified. We suggest using the phase-differential principle for busbar protection operation; its distinctive features are distinguished in comparison with traditional protections. The conditions for starting, tripping and returning of the phase-differential protection are determined, and there is suggested a method for determining the sensitivity of phase relay concerned to the angle. The phase characteristic of the protection is shown, which is the major operating characteristic which determines the width of the working zone and the blocking of this protection type.

Originality. For the first time, use of phase-differential busbar protection, the principle of which is based solely on comparing the phases of the secondary currents of bays, connected to the common busbar system, has been suggested. At the same time, there is no provision for the use of any additional protection relays, which can provide a protection starting and use a different principle of operation from the phase-differential one.

Practice value. The phase-differential busbar protection relay can be accepted into the technical operation in the power system facilities as an alternative option of using the traditional differential current protection. It has a number of advantages and allows solving existing problems of protection operation caused by increased requirements for current transformers in differential busbar protection circuits, necessity of tedious calculations of its, рабочих уставок, information redunancy and complexity of modern digital relays, which perform the function of phase-differential protection.

References.

1. Technical operation of power plants and networks. Rules(2003). Kyiv: NTUKTs.

2. Rules of electrical. Head 3.2. Relay protection (2015). Kyiv: NPTSR.

3. Gurevich, V. (2006). Microprocessor protection relays: new prospects or new problems? Electrotekhnika i Electromekhanika, 3, 18-26.

4. Kulagin, D.O. (2014). Mathematical model of traction of asynchronous engine taking into account saturation of magnetic circles. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 6, 103-110.

5. Kulagin, D.O. (2014). Mathematical model of traction asynchronous engine taking into account saturation. Tehnicna elektrodinamika, 6, 49-55.

6. Gurevich, V.A. (2006). Problem of Power Supply of Microprocessor-based Protective Relays in Emergency Mode. Electricity Today Transmission & Distribution Magazine, 8, 32-36.

7. Podshivalin, A., Klimatova, I., & Terentyev, Е. (2009). Modern Fault Location Technique for the Utility. In Proc. Int. Conf. IEEE Bucharest PowerTech. Bucharest, Romania, DOI: 10.1109/PTC.2009.5282019.

8. Pereira, C.E., & Zanetta, L.C. (2004). Fault location in transmission lines using one-terminal postfault voltage data. IEEE Transactions on power delivery, 19(2), 570-575.

9. Brahma, S.M., & Girgis, A.A. (2004). Fault location on a transmission line using synchronized voltage measurements. IEEE Transactions on power delivery, 19(4), 1619-1622. DOI: 10.1109/TPWRD.2003.822532.

10. Kjolle, G., Aabo, Y., & Hjartsjo, B. (2002). Fault Statistics as a Basis for Designing cost-effective Protection and Control Solutions. SIGRE, Session, 1-6.

 повний текст / full article



Visitors

3172530
Today
This Month
All days
375
12541
3172530

Guest Book

If you have questions, comments or suggestions, you can write them in our "Guest Book"

Registration data

ISSN (print) 2071-2227,
ISSN (online) 2223-2362.
Journal was registered by Ministry of Justice of Ukraine.
Registration number КВ No.17742-6592PR dated April 27, 2011.

Contacts

D.Yavornytskyi ave.,19, pavilion 3, room 24-а, Dnipro, 49005
Tel.: +38 (056) 746 32 79.
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
You are here: Home