Articles

Stability analysis of the pillars of the underground mine Chaabet El-Hamra, Algeria by analytical and numerical methods

User Rating:  / 1
PoorBest 

Authors:

R. Nakache, Badji Mokhtar University, Annaba, Algeria, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

M. L. Boukelloul, Dr. Sc. (Tech.), Badji Mokhtar University, Annaba, Algeria, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

A. Bouhedja, Dr. Sc. (Tech.), Badji Mokhtar University, Annaba, Algeria, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

M. Fredj, Badji Mokhtar University, Annaba, Algeria, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it., University Abderrahmane Mira, Bejaia, Algeria, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Abstract:

Purpose. Analysis of the current and proposed room and pillar exploitation technique of the Zinc mine (Chaabet El-Hamra) by two different approaches, the tributary area (TAM) for analytical method and numerical method (Finite Element Method FEM) through PLAXIS 3D software.

Methodology. In this work, the stability analysis of the room-and-pillar of the Chaabet El-Hamra mine was performed. Firstly, the safety factor for both conditions was calculated by TAM: 1) the current operation using 8.0 m wide rooms with 4.0 4.0 m pillar sections; 2) the proposed technique using 9.0 m wide rooms with 3.0 3.0 m pillar sections. Secondly, the numerical method was used to analyze pillar stability and total displacement of the proposed technique through the PLAXIS 3D software.

Findings. Using more than one method in underground mining for analysis of the existing or proposed technique is the best solutions for achieving reliable results.

Originality. The originality of this work is to use two different methods – TAM and numerical method (FEM) – for analyzing the rooms-and-pillars stability design at a mine and proving the accuracy of this method in mining engineering field

Practical value. The results of the chamber and pillar stability analysis indicate a safety factor of 1.38 for the proposed technique. In addition, the maximum displacements are 0.259 mm. Thus, the proposed operating technique of the layer will not cause stability problems. The production ratios show that the extraction rate of the current technique is 89 % and for the proposed technique it is 93.75 %, so these results show that the proposed technique is advantageous and more practical. The stability studies confirm the fact that geotechnical research with computer applications (numerical methods) in underground mining can make a significant contribution to developing safer and more economical stopping methods with greater health responsibilities, security and environment.

References.

1. Wael Rashad and Elrawy Abdellah, 2015. Parametric stability analysis of room and pillar method in deep coal mines. Journal of Engineering Sciences, Assiut University, Faculty of Engineering, 43(2), pp. 253–262.

2. John, L. P., Karekal, S. and Palroy, P., 2013. Web pillar design approach for Highwall mining extraction. International Journal of Rock Mechanics and Mining Sciences, 64, pp. 73–83. DOI: 10.1016/j.ijrmms.2013.08.029.

3. Yang, Y., Chen, S., Deng, K. and Fan, H., 2017. Long-Term Stability Evaluation and Pillar Design Criterion for Room-and-Pillar Mines.Energies, 10, 1644. DOI: 10.3390/en10101644.

4. Vidal Félix Navarro Torres, Carlos Dinis da Gama, Matilde Costa e Silva, Paula Falcão Neves and Qiang Xie, 2011. Comparative stability analyses of traditional and selective room-and-pillar mining techniques for sub-horizontal tungsten veins. International Journal of Minerals, Metallurgy and Materials. DOI: 10.1007/s12613-011-0392-2.

5. Nakache, R., Boukelloul, M.L. and Fredj, M., 2015.Stability Analysis of Underground Mining and their Application on the Mine Chaabet El-Hamra, Algeria. Procedia Earth and Planetary Science, 15, pp. 237‒243. DOI: 10.1016/j.proeps.2015.08.058.

6. Obert, L. and Duvall, W. L., 1967. Rock mechanic and the design of structures in rock. 1st ed. John Wiley and sons, Inc. ISBN-13: 978-0471652359.

7. Chhunla, C., 2018. Underground excavation behavior in Bangkok using three dimensional finite element method. Journal of Compute and Geotechnics, 95, pp. 68‒81. DOI:10.1016/j.compgeo.2017.09.016.

8. Luo, Y., 2015. Room-and-pillar panel design method to avoid surface subsidence. Mining Engineering, 67, pp. 105–110.

9. Renani, H. R. and Martin, G. D., 2018. Modeling the progressive failure of hard rock pillars. Tunnelling and Underground Space Technology, 74, pp. 71‒81. DOI: 10.1016/j.tust.2018.01.006.

10. Plaxis 3D Tunnel, 2000. V. 1.2 (build 1.296) copyright 2000, Plaxis bv.

 повний текст / full article



Visitors

6227298
Today
This Month
All days
1130
53975
6227298

Guest Book

If you have questions, comments or suggestions, you can write them in our "Guest Book"

Registration data

ISSN (print) 2071-2227,
ISSN (online) 2223-2362.
Journal was registered by Ministry of Justice of Ukraine.
Registration number КВ No.17742-6592PR dated April 27, 2011.

Contacts

D.Yavornytskyi ave.,19, pavilion 3, room 24-а, Dnipro, 49005
Tel.: +38 (056) 746 32 79.
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
You are here: Home