Articles

Working out setpoint of pulse rotation of the electric drive of the chisel machine tool

User Rating:  / 0
PoorBest 

Authors:

O.S. Beshta, Doctor of Technical Sciences, Professor, State Higher Educational Institution «National Mining University», Professor of the Electric Drive Department, Dnipropetrovsk, Ukraine

A.O. Kozhevnykov, Doctor of Technical Sciences, Professor, State Higher Educational Institution «National Mining University», Professor of the Department of Technology of Mineral Deposits Development, Dnipropetrovsk, Ukraine

V.S. Khilov, Candidate of Technical Science, Associate professor, State Higher Educational Institution «National Mining University», Senior Lecturer of the Department of Metrology and Information and Measurement Technologies, Dnipropetrovsk, Ukraine

O.A. Borysevych, State Higher Educational Institution «National Mining University», Director of Campus, Dnipropetrovsk, Ukraine

О.P. Belchytskyi, State Higher Educational Institution «National Mining University», Assistant Lecturer of the Department of Metrology and Information and Measurement Technologies, Dnipropetrovsk, Ukraine

I.I. Zhurko, State Higher Educational Institution «National Mining University», Research Fellow of the Department of Metrology and Information and Measurement Technologies, Dnipropetrovsk, Ukraine

Annotation:

The paper reviews the use of pulsed drilling technology to improve the rock destruction process efficiency, to reduce costs and minimize energy intensity during wells driving. Authors consider possibility of use of pulsed drilling technology with rock destruction tool of variable speed. The setpoint pulse speed in the system controlling the drive of the drilling machine is designed. The test of the developed pulse setpoint rotation with thyristor converter DC is completed.

References:

1. Буткин В.Д. Проектирование режимных параметров автоматизированных станков шарошечного бурения / Буткин В.Д. – М.: Недра, 1979. − 208 с.

Butkin V.D. Design of operation parameters of automated engineering tools for roller-bit drilling / Butkin V.D. – M.: Nedra, 1979. – 208 p.

2. Кожевников А.А. Импульсные технологии бурения геологоразведочных скважин / Кожевников А.А., Гошовский С.В., Мартыненко И.И. – К.: УкрГГРИ, 2003. – 208 c.

Kozhevnikov A.A. Impact technologies of geological exploration wells drilling / Kozhevnikov A.A., Goshovskiy S.V., Martynenko I.I. – K.: UkrGGRI, 2003. – 208 p.

3. Хилов В.С. Способ управления приводом вращения станка шарошечного бурения / Хилов В.С. //Гірнича електромеханіка та автоматика. – Дніпропетровськ, 2004. – Вип.72. – С. 116–119.

Khilov V.S. Control mode of rotational movement drive of roller-bit drilling engineering tool / Khilov V.S. // Gіrnycha elektromekhanіka ta avtomatyka. – Dnіpropetrovsk, 2004. – Issue 72. – P. 116–119.

4. Комплектные тиристорные электроприводы: Справочник / [И.Х. Евзеров, А.С. Горобец, Б.И. Мошкович и др.] Под. ред. к.т.н. В.М. Перельмутера. – М.: Энергоатомиздат, 1988. – 319с.

Complete thyristor electric drives: Reference book / [I.Kh. Yevzerov, A.S. Gorobets, B.I. Moshkovich et al.] edited by Cand. Sci. (Tech.) V.M. Perelmuter. – M.: Energoatomizdat, 1988. – 319 p.

Files:
2011_05_beshta
Date 2012-11-27 Filesize 361.28 KB Download 1807

Visitors

6239159
Today
This Month
All days
3613
65836
6239159

Guest Book

If you have questions, comments or suggestions, you can write them in our "Guest Book"

Registration data

ISSN (print) 2071-2227,
ISSN (online) 2223-2362.
Journal was registered by Ministry of Justice of Ukraine.
Registration number КВ No.17742-6592PR dated April 27, 2011.

Contacts

D.Yavornytskyi ave.,19, pavilion 3, room 24-а, Dnipro, 49005
Tel.: +38 (056) 746 32 79.
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
You are here: Home