Articles

Design of braking process of mine diaxonic locomotive on rail way

User Rating:  / 1
PoorBest 

Authors:

V.V. Protsiv, Dr. Sci. (Tech.), Associate Professor, State Higher Educational Institution „National mining university“, Professor of Department of Machines and Mechanisms Design, Dnipropetrovsk, Ukraine

A.O. Bondariev, State Higher Educational Institution „National mining university“, Student, Dnipropetrovsk, Ukraine

A.I. Samoilov, Science and Production Company “Mining machines”, Technical Manager of Wheel Transport, Donetsk, Ukraine

Abstract:

Purpose. Simulation of mine locomotive braking process performed by means of АРП10РВ wheel shoe brakes on a rail way with different coefficient of rolling friction and steps of rails joints through applying of braking torques, which cause over brings to failure of traction of the wheel in the point of its contact with the rail.

Methodology. Composition of equalizations of Lagrange of the second degree, which after transformation into differential equalizations of the second degree have been solved by means of the mathematical software Wolfram Mathematica 7, has been used to determine the length of braking distance.

Findings. Theoretical research of influence of muddiness and steps of mine rails track on the process of braking of biaxial locomotive АРП10РВ (mass of 10 tons) with rolling stock of the loaded trolleys by the devices which realize brake force in the point of contact of wheel and rail has been conducted. Even insignificant defects on rail way are able to influence considerably on the quality of braking process of biaxial locomotive АРП10РВ with the stock of the loaded trolleys. It is found out that influence of steps of rail joints on brake force in the contact point of wheel and rail for the biaxial locomotive is not so considerable, as for fouraxialjoint-joined one of similar trailing weight.

Originality. Use of the preliminary measured parameters of rail way, such as muddiness, crossfall and inclination, steps of rail joints est. in calculation of the braking distance of a train.

Practical value. The research results allow us to count the number of the loaded trolleys which can be transported by a mine locomotive through the dangerous section of rail way with known geometry features.

References:

1. Процив В.В. Экспериментальное определение характеристик сцепления шахтного локомотива в режиме торможения / В.В. Процив, А.Г. Моня // Металлургическая и горнорудная промышленность. - Днепропетровск, 2003. – №2. – С. 95–97.

Protsiv, V.V., Monia, A.H. (2003), “Experimental determination of locomotive grip descriptions in the braking mode”, Metallurgical and mining industry, no2, pp. 95–97.

2. Транспорт шахтний локомотивний. Перевезення людей і вантажів у виробках з ухилом колії від 0,005 до 0,050: СОУ 10.1.001.85790.007:2006. – Затв. Мінвуглепромом України 06.10.2006. – Вид. офіц. – К., 2006. – 47 с.

Mine locomotive transport. Transportation of people and loads in workings with inclination of 0,005 to 0,050: SOU 10.1.001.85790.007:2006. – Approved by Minvuhleprom of Ukraine 06.10.2006, Official edition, Kyiv.

3. Проців В.В. Визначення сил опору руху та направляючих зусиль шахтного шарнірно-зчленованого локомотива в режимі гальмування / Проців В.В. // Збірник наукових праць НГУ. – Дніпропетровськ, 2009. – № 33. – Т. 1 – С. 96–102.

Protsiv, V.V. (2009), “Searching the forces of resistance motion and sending efforts of mining joint locomotive in the braking mode”, Collection of scientific works of NMU, Dnipropetrovs’k, no 33, Vol. 1, pp. 96-102.

4. Проців В.В. Динамічна модель гальмівних систем, що реалізовують гальмівну силу в контакті колеса та рейки / В.В. Проців, О.Є. Гончар // Збірник наукових праць НГУ. – Дніпропетровськ, 2010. – № 34. – Т. 2 – С. 160–171.

Protsiv, V.V. (2010), “Dynamic model of the brakes systems which realize brake force in the contact of wheel and rail”, Collection of scientific works of NMU, Dnipropetrovsk, no.34, Vol. 2, pp. 160–171.

5. Проців В.В. Наукове обґрунтування нових технічних рішень з удосконалення гальмівної системи шахтного шарнірно-зчленованого локомотива: автореф. дис. на здобуття наук. ступеня докт. техн. наук : спец. 05.05.06 „Гірничі машини“ / Проців В.В. – Дніпропетровськ, 2011. – 36 с.

Protsiv, V.V. (2010), “Scientific ground of technical decisions on perfection of the brake system of the mine joint-joined locomotive”, Abstract of Dr. dissertation, Mining Engineering, NMU, Dnipropetrovsk, Ukraine.

Files:
2012_5_protsiv
Date 2013-10-17 Filesize 516.62 KB Download 1372

Visitors

6237534
Today
This Month
All days
1988
64211
6237534

Guest Book

If you have questions, comments or suggestions, you can write them in our "Guest Book"

Registration data

ISSN (print) 2071-2227,
ISSN (online) 2223-2362.
Journal was registered by Ministry of Justice of Ukraine.
Registration number КВ No.17742-6592PR dated April 27, 2011.

Contacts

D.Yavornytskyi ave.,19, pavilion 3, room 24-а, Dnipro, 49005
Tel.: +38 (056) 746 32 79.
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
You are here: Home