Науковий вісник НГУ

Simulation of the operation modes of the catodic protection complex of pipelines in the approach of overhead power lines

• 
• 

User Rating:  / 0

PoorBest 

Details

Category: Content №6 2024

Last Updated on 28 December 2024

Published on 30 November -0001

Hits: 174

Authors:

O.Aziukovskyi, orcid.org/0000-0003-1901-4333, Dnipro University of Technology, Dnipro, Ukraine

Yu.Papaika*, orcid.org/0000-0001-6953-1705, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

O.Podoltsev, orcid.org/0000-0002-9029-9397, Institute of Electrodynamics of the National Academy of

Sciences of Ukraine, Kyiv, Ukraine

M.Babenko, orcid.org/0000-0003-2309-0291, Dnipro University of Technology, Dnipro, Ukraine

S.Shykhov, orcid.org/0009-0000-9459-9277, Dnipro University of Technology, Dnipro, Ukraine

* Corresponding author e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

повний текст / full article

Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2024, (6): 073 - 078

https://doi.org/10.33271/nvngu/2024-6/073

Abstract:

Purpose. The purpose of the work is to establish the dependences of the levels of the protective potential of the system of protection of underground steel pipelines when approaching and/or crossing overhead power lines.

Methodology. To achieve the goal, the methods of the theory of equivalent electric circuits and the theory of the electromagnetic field, implemented in the packages of applied computer programs Matlab/Simulink and COMSOL Multiphysics, were used.

Findings. The spatial distribution in the soil of the induced electric field of the overhead power line in the direct location of the pipeline, which varies with a frequency of 50 Hz, was determined. The distribution of both constant and alternating voltage on the pipeline relative to the soil is given. An analysis of corrosion processes in the pipeline was carried out, on the basis of which the relatively safe flow of corrosion processes in the pipeline under the action of simultaneously occurring alternating current with a frequency of 50 Hz and direct current was investigated.

Originality. The scientific novelty of the work consists in determining the regularities of the influence of overhead lines on the nature of the distribution of the protective potential of cathodic protection stations with variable changes in the configuration of pipelines and laying conditions. The existence of significant deviations of the levels of the protective potential in the presence of a variable polyharmonic component of the signal is proven. On the basis of the study, it was established that under the accepted initial conditions, both criteria are unsatisfactory in some sections of the pipeline near the power transmission line.

Practical value. The practical significance of the research results is in determining the set of technical characteristics of the electrotechnical complex of protection against electrochemical corrosion, which allows ensuring the necessary levels of protective potential in the presence of a source of stray currents (overhead power lines).

Keywords: underground steel pipeline, cathodic protection, electrochemical corrosion, power lines

References.

1. Mark, E. (Ed.) (2014). Underground pipeline corrosion detection, analysis and prevention. Orazem Elsevier. ISBN: 9781306459983.

2. Aziukovskyi, O. O., Papaika, Y. A., Gorev, V. N., & Babenko, N. V. (2024). Regulations of the formation of protective potential of underground steel pipelines under conditions of heterogeneous environment. Technical Electrodynamics, 2024(2), 23-29. https://doi.org/10.15407/techned2024.02.023.

3. Aziukovskyi, A. (2013). The electrochemical cathodic protection stations of underground metal pipelines in uncoordinated operation mode. Energy Efficiency Improvement of Geotechnical Systems – Proceedings of the International Forum on Energy Efficiency, 47-55. https://doi.org/10.1201/b16355-7.

4. Ahmed, N.E.I. Ayad, Krika, W., Boudjella, H., Benhamida, F., & Horch, A. (2019). Simulation of the Electromagnetic Field in the Vicinity of the Overhead Power Transmission Line. European Journal of Electrical Engineering, 21(1), 49-53, https://doi.org/10.18280/ejee.210108.

5. Vyas, A., & Jamnani, J. G. (2019). Analysis and design optimization of 765 kV transmission line based on electric and magnetic fields for different line configurations. 2016 IEEE 6 ^th International Conference on Power Systems (ICPS), 1-6, https://doi.org/10.1109/ICPES.2016.7584136.

6. Hajji, E. l., Mahmoudi, H., & Labbadi, M. (2020). The electromagnetic interferance caused by high voltage power lines along the electrical railway equipment. International Journal of Electrical and Computer Engineering, 10(5), 4581-4891.  https://doi.org/10.11591/ijece.v10i5.

7. Sharif, H. M., Jamail, N. A. M., Othman, N. A., & Kamarudin, M. S. (2017). Analysis of electric field and current density on XLPE insul., International Journal of Electrical and Computer Engineering (IJECE), 7(6), 3095-3104. https://doi.org/10.11591/ijece.v7i6.

8. Luqman, H. M., Baharom, M. N. R., Ahmad, H., & Ullah, I. (2017). Planning and conducting magnetic field level measurement from overhead transmission line. International Journal of Electrical  and Computer Engineering (IJECE ), 7(6), 3124-3132. https://doi.org/10.11591/ijece.v7i6.

9. Li, X. M., Rosas, O., & Castaneda, H. (2016). Deterministic Modeling of API5L X52 Steel in a Coal-Tar-Coating/Cathodic-Protection System in Soil. International Journal of Pressure and Piping, 146, 161-170. https://doi.org/10.1016/j.ijpvp.2016.09.003.

10. Brenna, A., Beretta, S., & Ormellese, M. (2020). AC Corrosion of Carbon Steel under Cathodic Protection Condition: Assessment, Criteria and Protection Condition: Assessment, Criteria and Mechanism. A Review. Materials, 13, 2158. https://doi.org/10.3390/ma13092158.

11. Janik, P., Kosobudzki, G., & Schwarz, H. (2017). Influence of increasing numbers of RE-inverters on the power quality in the distribution grids: A PQ case study of a representative wind turbine and photovoltaic system. Frontiers in Energy, 11(2), 155-167. https://doi.org/10.1007/s11708-017-0469-3.

12. Shcherba, M., Shcherba, A., & Peretyatko, Y. (2020). Mathematical Modeling of Electric Current Distribution in Water Trees Branches in XLPE Power Cables Insulation. IEEE 7 ^th International Conference on Energy Smart Systems. ESS 2020. Kyiv, Ukraine, May 12–14, 2020, (pp. 353-356). https://doi.org/10.1109/ESS50319.2020.9160293.

13. Shcherba, M. A. (2016). Multi-physical processes during electric field disturbance in solid dielectric near water micro-inclusions connected by conductive channels. IEEE 2 ^nd International Conference on Intelligent Energy and Power Systems (IEPS). Kyiv, Ukraine, June 7–11, 2016, (pp. 1-5). https://doi.org/10.1109/IEPS.2016.7521842.

14. Micu, D. D., Czumbil, L., Christoforidis, G. C., Ceclan, A., & Stet, D. (2012). Evaluation of induced AC voltages in underground metallic pipeline. COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 31(4), 1133-1143. https://doi.org/10.1108/03321641211227375.

15. Kosobudzki, G., Rogoza, M., Lysenko, O., & Papaika, Yu. (2018). Frequency and Parametric Characteristics of Direct Current Pulse Conversion Filter of a Contactless Locomotive. 14 ^th Selected Issues of Electrical Engineering and Electronics (WZEE). https://doi.org/10.1109/WZEE.2018.8748987.

16. Pivnyak, G., Rogoza, M., Papaika, Y., & Lysenko, A. (2015). Traction and energy characteristics of no-contact electric mining locomotives with AC current thyristor converters. Power Engineering, Control and Information Technologies in Geotechnical Systems, 1-6. https://doi.org/10.1201/b18475-1.

17. Beshta, A., Balakhontsev, A., & Khudolii, S. (2019). Performances of Asynchronous Motor within Variable Frequency Drive with Additional Power Source Plugged via Combined Converter. IEEE 6 ^th International Conference on Energy Smart Systems, ESS 2019 – Proceedings, 2019, 156-160, 8764192. https://doi.org/10.1109/ESS.2019.8764192.

18. Pivniak, H., Aziukovskyi, O., Papaika, Yu., Lutsenko, I., & Neuberger, N. (2022). Problems of development of innovative power supply systems of Ukraine in the context of European integration. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (5), 89-103. https://doi.org/10.33271/nvngu/2022-5/089.

19. Dyczko, A. (2023). Real-time forecasting of key coking coal quality parameters using neural networks and artificial intelligence. Rudarsko-Geološko-Naftni Zbornik, 38(3), 105-117. https://doi.org/10.17794/rgn.2023.3.9.

20. Dusza, D., & Kosobudzki, G. (2018). Reactive power measurements based on its geometrical interpretation. 14 ^th Selected Issues of Electrical Engineering and Electronics, WZEE, 8749118. https://doi.org/10.1109/WZEE.2018.8749118.

21. Wang, C., & Li, W., & Wang, Yu. (2021). A probabilistic-based model for dynamic predicting pitting corrosion rate of pipeline under stray current interference. Journal of Pipeline Science and Engineering. https://doi.org/10.1016/j.jpse.2021.09.003.

22. Balakhontsev, A., Beshta, O., Boroday, V., Khudolii, S., & Pirienko, S. (2021). A Review of Topologies of Quick Charging Stations for Electric Vehicles. International Conference on Modern Electrical and Energy Systems (MEES), 1-4.

23. Piriienko, S., Wang, W. V., Neuburger, M., Thrimawithana, D. J., & Balakhontsev, A. (2021). Nacelle-to-Tower Multilevel IPT System for Small-Scale Wind Turbines. IEEE Transactions on Power Electronics, 36(5), 5043-5054, 9233926. https://doi.org/10.1109/TPEL.2020.3032183.

24. Kuzmin, A., Pinchuk, V., Koshelenko, Y., Arango, D. A. G., & Villa, C. F. H. (2024). Specifics of the combined electromagnetic and thermal pre-treatment of the coal-water fuel. International Journal of Energy for a Clean Environment, 25(7), 93-116. https://doi.org/10.1615/InterJEnerCleanEnv.2024053062.

• < Prev
• Next >