Improving the process of occupational risk management according to the Haddon matrix
/ 0
- Details
- Category: Content №2 2023
- Last Updated on 28 April 2023
- Published on 30 November -0001
- Hits: 4014
Authors:
V.A.Tsopa, orcid.org/0000-0002-4811-3712, International Institute of Management, Kyiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
S.I.Cheberiachko, orcid.org/0000-0003-3281-7157, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
O.O.Yavorska, orcid.org/0000-0001-5516-5310, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
O.V.Deryugin*, orcid.org/0000-0002-2456-7664, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
T.O.Bilko, orcid.org/0000-0003-3164-3298, National University of Life and Environmental Sciences of Ukraine, Kyiv, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
* Corresponding author e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2023, (2): 105 - 112
https://doi.org/10.33271/nvngu/2023-2/105
Abstract:
Purpose. Improving the process of managing occupational risk (OR) in occupational safety and health management systems, due to the distribution of dangerous factors which increase the probability of a dangerous event into several phases: before the occurrence of a dangerous event and after its occurrence.
Methodology. The method of morphological analysis is used, which is based on the selection of possible solutions for individual parts of the task based on several morphological typical features important for the problem being solved, and the compilation of all possible combinations of hazardous factors and precautionary measures that will allow reducing the amount of occupational risk.
Findings. A new approach to occupational risk management is proposed, which involves the division of all dangerous factors into several phases: before the occurrence of a dangerous event, after its occurrence, provision of pre-medical assistance, provision of emergency and medical care. Typical dangerous factors are defined that increase the probability of the occurrence of a dangerous event, which relate to the first phase (before the occurrence of a dangerous event), as well as dangerous factors that affect the severity of accidents and are characteristic of the second, third and fourth phases (after the occurrence of a dangerous event). A concept was developed for calculating the magnitude of occupational risks, based on the consequences of the occurrence of a dangerous event or by the type of injury with the area of responsibility of the enterprise; from the consequences of pre-medical care or the condition of an injured person with the area of responsibility of the enterprise and with the consequences of emergency and inpatient medical care or the state of loss of health of the employee with the area of responsibility of the medical institution. The hierarchy of preventive measures has been improved due to the addition of protective measures consisting of pre-medical care, emergency medical care, in-patient medical care.
Originality. When assessing professional risks, it is proposed to determine the amount in accordance with the area of responsibility of the enterprise and and medical institution taking into account dangerous factors corresponding to a specific phase.
Practical value. Examples of three matrices for assessing the occupational risk have been developed, taking into account the classification of the severity of the consequences for the health of the employee, which occurred immediately after the occurrence of a dangerous event (accident), after the provision of pre-medical care and after the provision of emergency and medical care. A description of preventive actions to reduce the severity of the consequences is proposed, taking into account the sphere of responsibility.
Keywords: occupational risk, Haddon’s matrix, occupational safety and health management system
References.
1. DSTU ISO 45001:2019 Occupational health and safety management systems. Requirements and guidelines for application (ISO 45001:2018, IDT). Kyiv: UkrNDNC (2019). Retrieved from http://online.budstandart.com/ua/catalog/doc-page.html?id_doc=88004.
2. Mohammadfam, I., Saraji, G. N., Kianfar, A., & Mahmoudi, S. (2013). Developing the health, safety and environment excellence instrument. Iranian Journal of Environmental Health Science & Engineering, 10, 7. https://doi.org/10.1186/1735-2746-10-7.
3. Tsopa, V., Cheberiachko, S., Yavorska, O., Deryugin, O., & Bas, I. (2022). Increasing the safety of the transport process by minimizing the professional risk of a dump truck driver. Mining of mineral deposits, 16(3), 101-108. https://doi.org/10.33271/mining16.03.101.
4. Li, Y., & Guldenmund, F. (2018). Safety management systems: A broad overview of the literature. Safety Science, 103, 94-123. https://doi.org/10.1016/J.SSCI.2017.11.016.
5. Otitolaiye, V. O., Abd Aziz, F. S., Munauwar, M., & Omer, F. (2021). The Relationship Between Organizational Safety Culture and Organization Safety Performance. The Mediating Role of Safety Management System. International Journal of Occupational Safety and Health, 11(3), 148-157. https://doi.org/10.3126/ijosh.v11i3.xxxx.
6. Bochkovskyi, A. P. (2016). Theoretical aspects of the universalization of occupational risk assessment in occupational health and safety management systems. Bulletin of Lviv State University of Life Safety, 14, 134-151. Retrieved from https://journal.ldubgd.edu.ua/index.php/Visnuk/article/view/325.
7. DSTU IEC/ISO 31010:2013 Risk management. Methods of general risk assessment (IEC/ISO 31010:2009, IDT). Kyiv: UkrNDNC (2014). Retrieved from http://online.budstandart.com/ua/catalog/doc-page.html?id_doc=66723.
8. Holmes, B. D., Haglund, K., Ameh, E. A., Olaomi, O. O., Uthman, U., & Cassidy, L. D. (2020). Understanding Etiologies of Road Traffic Crashes, Injuries, and Death for Patients at National Hospital Abuja: A Qualitative Content Analysis Using Haddon’s Matrix. The Qualitative Report, 25(4), 962-974. https://doi.org/10.46743/2160-3715/2020.4152.
9. Fritch, W. M., Agnew, J., Rosman, L., Cadorette, M. A., & Barnett, D. J. (2021). Application of the Haddon matrix to COVID-19 prevention and containment in nursing homes. Journal of the American Geriatrics Society, 69(10), 2708- 2715. https://doi.org/10.1111/jgs.17358.
10. Peron, M., Arena, S., Jacopo, G., Micheli, L., & Sgarbossa, F. (2022). A decision support system for designing win–win interventions impacting occupational safety and operational performance in ageing workforce contexts. Safety Science, 147, 105598. https://doi.org/10.1016/j.ssci.2021.105598.
11. Vesela, M., Cheberyachko, S., Deryugin, O., Yavorskaya, O., Tretyak, O., & Bas, I. (2022). Improving the Passenger Road Transportation Safety Management System. “Proceedings of 26th International Scientific Conference TRANSPORT MEANS 2022”, 05–07 October, 2022, Vilnius, Lithuania, (pp. 296-301). Retrieved from https://www.ebooks.ktu.lt/eb/1610/transport-means-2022-part-i-proceedings-of-the-26th-international-scientific-conference/.
12. Tsopa, V. (2022). Basic risk management methodology in management systems. Labor protection, 9, 30-36. Retrieved from https://ohoronapraci.kiev.ua/journal/ohorona-praci-92022?lang=#page=2.
13. Bernsmed, K., Frøystad, C., Meland, P. H., Nesheim, D.A., & Rødseth, Ø. J. (2018). Visualizing Cyber Security Risks with Bow-Tie Diagrams. In: Liu, P., Mauw, S., Stolen, K. (eds). Graphical Models for Security. GraMSec 2017. Lecture Notes in Computer Science, 10744. Springer, Cham. Retrieved from https://ntnuopen.ntnu.no/ntnu-xmlui/bitstream/handle/11250/2489562/Visualizing+cyber.pdf.
14. Vriend, I., Gouttebarge, V., Finch, C. F., Van Mechelen, W., & Verhagen, E. A. (2017). Intervention Strategies Used in Sport Injury Prevention Studies: A Systematic Review Identifying Studies Applying the Haddon Matrix. Sports Medicine (Auckland, N.z.), 47, 2027-2043. https://doi.org/10.1007/s40279-017-0718-y.
15. Yan, T. C., & Yu, M. (2019). Using the Haddon matrix to explore medical response strategies for terrorist subway bombings. Military Medical Research, 6, 18. https://doi.org/10.1186/s40779-019-0209-6.
16. Dixon, C. A., Ammerman, R. T., Dexheimer, J. W., Meyer, B., Jung, H., Johnson, B. L., Elliott, J., Jacobs, T., Pomerantz, W. J., & Mahabee-Gittens, E. M. (2014). Development of iBsafe: A Collaborative, Theory-based Approach to Creating a Mobile Game Application for Child Safety. Annual Symposium proceedings. AMIA Symposium, 477-485. Retrieved from https://europepmc.org/article/pmc/4419895.
17. Xiong, L., Ball, M., & Bruck, D. (2014). Utilization of the Haddon Matrix to Organize Factors of Survived Accidental Residential Fires: Frequencies for Human, Agent, and Environment-related Variables. Fire Safety Journal, 11(5), 1049-1062. https://doi.org/10.3801/iafss.fss.11-1049.
18. Bochkovskyi, A. P. (2018). Optimization of professional risk management. Bulletin of Lviv State University of Life Safety, 33, 32-40. https://doi.org/10.32447/20784643.17.2018.04.
19. Chin, L. S., & Abdul Hamid, A. R. (2015). The Practice of Time Management on Construction Project. Procedia Engineering, 125, 32-39. https://doi.org/10.1016/j.proeng.2015.11.006.
20. Bilir, S., & Gürcanli, G. E. (2018). A Method for Determination of Accident Probability in the Construction Industry. Teknik Dergi, 29(4), 8537-8561. https://doi.org/10.18400/tekderg.363613.
Newer news items:
- Efficiency and internationalization of mining and metallurgical groups of Ukraine - 28/04/2023 00:36
- Peculiarities of evaluating the results of implementation of regional development programs in Ukraine - 28/04/2023 00:36
- Economic security of Ukraine under the destructive influence of exogenous determinants - 28/04/2023 00:36
- Prospective methods for determining water losses from irrigation systems to ensure food and water security of Ukraine - 28/04/2023 00:36
- The impact of Industry 4.0 on the digital transformation of manufacturing enterprises in Ukraine - 28/04/2023 00:36
- Influence of Industry 4.0 on strategies of companies entering the global market of data integration services - 28/04/2023 00:36
- Increasing the efficiency of using backline and private railway infrastructure in the conditions of the transportation market - 28/04/2023 00:36
- Phenol adsorption onto olive pomace activated carbon: modelling and optimization - 28/04/2023 00:36
- Theoretical and legal aspects of the regulation of environmental and land legal relations in the conditions of martial law in Ukraine - 28/04/2023 00:36
- Social responsibility for the safety and health of employees at work - 28/04/2023 00:36
Older news items:
- Improving the environmental efficiency of glass furnace chimneys using heat recovery technologies - 28/04/2023 00:36
- Investment management and financial development in infrastructure renovation of a sustainable-built environment - 28/04/2023 00:36
- Peculiarities of thermomodernization of the heating system of military infrastructure complexes - 28/04/2023 00:36
- Predicting of vertical displacements of structures of engineering buildings and facilities - 28/04/2023 00:36
- The influence of the impeller design features on the combined operating process of the torque-flow pump - 28/04/2023 00:36
- Inner shear resistance increasing effect of Concrete Canvas in ballasted railway tracks - 28/04/2023 00:36
- Contact tensions under the sole of rigid deep laying foundations and ground anchors - 28/04/2023 00:36
- Patterns of air mixture movement in the operating area for the annular ejector of pneumatic transportation system - 28/04/2023 00:36
- Using nonlinear ultrasonic measurements to estimate parameters of the sedimentation of slurry solid phase in thickener - 28/04/2023 00:36
- Selection of the means of auxiliary transportation facilities and adaptation of their parameters to specific operation conditions - 28/04/2023 00:36
