Influence of the heat-transfer stream pressure on the surface of the rock in a process of the thermal reaming of the borehole

User Rating:  / 1
PoorBest 

Authors:

O. I. Voloshyn, Corresponding Member of the NAS of Ukraine, Dr Sc. (Tech.), Prof., orcid.org/0000-0002-5634-3198, M. S. Polyakov Institute of Geotechnical Mechanics of the NAS of Ukraine, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.

I. Yu. Potapchuk, orcid.org/0000-0002-5985-1040, M. S. Polyakov Institute of Geotechnical Mechanics of the NAS of Ukraine, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.

O. V. Zhevzhyk, Cand. Sc. (Tech.), Assoc. Prof., orcid.org/0000-0002-8938-9301, M. S. Polyakov Institute of Geotechnical Mechanics of the NAS of Ukraine, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.

Abstract:

Purpose.Experimental research on the high-speed interaction of the heat transfer medium jet with the surface of the borehole in the process of fragile rock destruction with the purpose of determination of the heat transfer medium velocity along the borehole surface and the heat transfer coefficient from the heat transfer medium to the rock surface.

Methodology.Methods of comparative analysis, mathematic and physical simulation modelling as well as experimental research are used.

Findings.The methodology of experimental research on high-speed interaction of the heat transfer medium jet with the surface of borehole as the lateral surface of the cross duct imitated the rock surface in a borehole is developed. Experimental research that consisted of pressure measurement on the lateral surface of the cross duct at the air jet impingement on the lateral surface is conducted. Experimental research treatment is executed as dependence of absolute pressure at the lateral surface of the cross duct, i.e. absolute pressure on the rock surface, from relative pressure of air before a nozzle and relative diameter of the cross duct. Dependences between the values of pressure before a nozzle and values of pressure on the rock surface, values of relative diameter of the cross duct, nozzle outlet diameter, inner diameter of the cross duct and values of air pressure along the lateral surface of the duct are determined.

Originality.The work presents physical imitational modelling of high-speed interaction of the heat transfer medium jet with the surface of the borehole in a certain range of geometrical parameters of the cross duct and the nozzle, that is accepted in accordance with geometrical similarity to the technological and processing parameters of plasmatron and borehole diameter before the beginning of thermal reaming process.

Practical value.Expediency of high-speed plasma jets application as a thermal tool in the processes of fragile rock destruction and, in particular, in the processes of thermal reaming of the boreholes is substantiated.

References.

1.Dmitriev, A.P., Goncharov, S.A. and Zilbershmidt, M.G., 2011. Contemporary problems of selective and energy saving rock destruction. Gornyy informatsionno-analiticheskiy byulleten, 1, pp. 169‒184.

2.Bazargan, M., Gudmundsson, A., Meredith, P., Inskip, N.F., Soliman, M.Y., Fatideh, M.H., Rezaei, A. and Browning, J., 2015. Wellbore instability during plasma torch drilling in geothermal reservoirs. In: 49th US Rock Mechanics / Geomechanics Symposium, San Francisco, CA, June 28-July [online], ARMA, pp. 1‒4. Available at: <https://www.researchgate.net/publication/275962154_Wellbore_instability_during_plasma_torch_drilling_in_geothermal_reservoirs> [Accessed 14 May 2017].

3.Kocis, I., Kristofic, T., Gajdos, M., Horvath, G. and Jankovic, S., 2015. Utilization of Electrical Plasma for Hard Rock Drilling and Casing Milling. In: SPE/IADC Drilling Conference and Exhibition, London, March 17–19 [online], Society of Petroleum Engineers, pp. 1‒14. Available at: <https://www.onepetro.org/conference-paper/SPE-173016-MS> [Accessed 6 August 2017].

4.Falshtynskyi, V., Dychkovskyi, V., Lozynskyi, V. and Saik, P., 2012. New method for justification of the technological parameters of coal gasification in the test setting. Geomechanical Processes During Underground Mining – Proceedings of the School of Underground Mining, pp. 201–208. DOI: 10.1201/b13157-35.

5.Dychkovskyi, R.O., Lozynskyi, V.H., Saik, P.B., Petlovanyi, M.V., Malanchuk, Ye.Z. and Malanchuk, Z.R., 2018. Modeling of the disjunctive geological fault influence on the exploitation wells stability during underground coal gasification. Archives of Civil and Mechanical Engineering, 18(3), рр. 902‒911. DOI: 10.1016/j.acme.2018.01.012.

6.Sobolev, V.V. and Usherenko, S.M., 2006. Shock-wave initiation of nuclear transmutation of chemical elements. Journal de Physique IV (Proceedings), 134, pp. 977–982. DOI: 10.1051/jp4:2006134149.

7.Filippov, A.I., Akhmetova, O.V. and Rodionov, A.S., 2012. Heat transfer of turbulent stream in a borehole. In: XV Minsk International Heat and Mass Transfer Forum, Minsk, September 10–13 [online], pp. 1‒6. Available at: <www.itmo.by/ru/conferences/mif_14/Section 1> [Acce­ssed 7 July 2017].

8.Babayan, E.V. and Chernenko, A.V., 2016. Engineering calculations at the boring drilling. Moscow: Infra-Inzheneriya.

9.Gulin, V.V. and Ustimenko, T.A., 2014. Designing of generators of impulse jets on the basis of structural synthesis. Eastern-European Journal of Enterprise Technologies, 4(7), pp. 38‒45.

10.Kant, M., Rossi, E., Höser, D. and von Rohr, P. R., 2017. Thermal Spallation Drilling, an Alternative Drilling Technology for Deep Heat Mining–Performance Analysis, Cost Assessment and Design Aspects. In: Proceedings, 42nd Workshop on Geothermal Reservoir Engineering, Stanford University, Stanford, CA, February 13–15 [online], pp. 1‒10. Available at: <https://pangea.stanford.edu/ERE/db/GeoConf/papers/SGW/2017> [Accessed 7 August 2017].

11.Kant, M.A. and von Rohr, P.R., 2016. Minimal required boundary conditions for the thermal spallation process of granitic rocks. International Journal of Rock Mechanics and Mining Sciences, 84, pp. 177‒186.

12.Galarraga, C., 2016. An unconventional fixed cutter cutting structure layout to drill through Hard, Abrasive Conglomerates in Deep Wells ‒ A case study. In: Abu Dhabi International Petroleum Exhibition & Conference, November 7–10, Society of Petroleum Engineers [online], pp. 1‒10. Available at: <https://www.onepetro.org/conference-paper/SPE-182879-MS> [Accessed 24 June 2017].

13.Brkic, D., Kant, M., Meier, T., Schuler, M. and Rohr, R., 2015. Influence of Process Parameters on Thermal Rock Fracturing under Ambient Conditions. In: Proceedings, World Geothermal Congress 2015, Melbourne, April 19–25 [pdf], pp. 1‒6. Available at: <https://pangea.stanford.edu/ERE/db/WGC/papers/WGC/2015/21039.pdf>[Accessed 3 May 2017].

14.Pavese, F. and Min Beciet, G. M., 2013. Modern gas-based temperature and pressure measurements. New York: Springer.

15.Venkateshan, S. P., 2015. Mechanical Measurements. New York: Wiley.

16.Morris, A. and Langari, R., 2012. Measurement and Instrumentation: Theory and Application [pdf]. Amsterdam: Elsevier. Available at: <https://thetastash.files.wordpress.com/2016/01/measurement-instrumentation-theory-and-application-by-alan-s-morris-reza-langari.pdf> [Accessed 17 September 2017].

17.Nawrocki, W., 2015. Measurement systems and sensors. New York: Artech House Publishers.

18.Nguyen-Kuok, S., 2014. Theory of low-temperature plasma physics. London: Springer.

 повний текст / full article



Visitors

6227455
Today
This Month
All days
1287
54132
6227455

Guest Book

If you have questions, comments or suggestions, you can write them in our "Guest Book"

Registration data

ISSN (print) 2071-2227,
ISSN (online) 2223-2362.
Journal was registered by Ministry of Justice of Ukraine.
Registration number КВ No.17742-6592PR dated April 27, 2011.

Contacts

D.Yavornytskyi ave.,19, pavilion 3, room 24-а, Dnipro, 49005
Tel.: +38 (056) 746 32 79.
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
You are here: Home Archive by issue 2018 Content №2 2018 Geotechnical and Mining Mechanical Engineering, Machine Building Influence of the heat-transfer stream pressure on the surface of the rock in a process of the thermal reaming of the borehole