Науковий вісник НГУ

Revisiting the underground gasification of coal reserves from contiguous seams

• 
• 

User Rating:  / 0

PoorBest 

Details

Category: Mining

Last Updated on 19 January 2017

Published on 19 January 2017

Hits: 4016

Authors:

P.B.Saik, Cand. Sc. (Tech.), State Higher Educational Institution “National Mining University”, Dnipro, Ukrainе, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

R.O.Dychkovskyi, Dr. Sc. (Tech.), Prof., State Higher Educational Institution “National Mining University”, Dnipro, Ukrainе, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

V.H.Lozynskyi, Cand. Sc. (Tech.), State Higher Educational Institution “National Mining University”, Dnipro, Ukrainе, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Z.R.Malanchuk, Dr. Sc. (Tech.), Prof., National University of Water Management and Nature Resources Use, Rivne, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Ye.Z.Malanchuk, Dr. Sc. (Tech.), Assoc. Prof. National University of Water Management and Nature Resources Use, Rivne, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Abstract:

Purpose. Substantiating of contiguous coal seams coefficient during application of borehole underground coal gasification technology based on dependences of interstratial rocks subsidence on gasification duration.

Methodology. Using stand experimental research and methods of computer modeling we obtained the dependences of interstratial rocks subsidence in terms of their thickness change, alternating thickness of coal seams and duration of the gasification process. To reflect the geomechanical situation of rock mass around underground gasifier, license software Flac 5.00 was used. For data processing and building of synthesis dependences, the method of multiple regression using generally accepted data processing systems – Excel-2013 was used.

Findings. The obtained inequality allows setting the coefficient of contiguous coal seams during the application of underground gasification technology. Setting this factor makes it possible to assess mining and geo-logical conditions of coal seams occurrence with further rational order of their gasification. For values of contiguous coefficient 5.5–5.7, gasification of coal seams can be carried out both in ascending and descending sequence. In this case, there is no need to preserve the allowable distance between combustion faces on adjacent seams.

Originality. To determine the contiguous of coal seams, a mathematical mechanism was developed, whose effectiveness is confirmed by computer simulation of rock massif that contains an underground gasifier and by research on a special test bench installation. The difference between the results was less than 24 %.

Practical value. Dependence of interstratial rocks subsidence at changing duration of the gasification process describing the development of possible formation of gas-permeable cracks in interstratial rocks ensuring technological process was established. The obtained conditions of contiguous coal seams allow providing rational orderof mine workings.

References/Список літератури

1. Lozynskyi, V.H., Dychkovskyi, R.O., Falshtynskyi, V.S. and Saik, P.B., 2015. Revisiting possibility to cross disjunctive geological faults by underground gasifier, Naukovyi Visnyk Natsionalnoho HirnychohoUniversytetu, No. 4, pp. 22–28.

2. Falshtynskyy, V., 2012. New method for justification of the technological parameters of coal gasification in the test setting. In: Geomechanical Processes During Underground Mining – Proceedings of the School of Underground Mining. CRC Press/Balkema, The Netherlands, рр. 201–208.

3. Trizno, S.K. and Lazarenko, S.N., 2007. Sposob podzemnoy gazifikatsii svity ugol’nykh plastov. Pat. 2307244 RF MPK E21V43/295.

Патент № 2307244 РФ МПК Е21В43/295. Способ подземной газификации свиты угольных пластов / С.К.Тризно, С.Н.Лазаренко и др. – Опубл. 27.09.2007.

4. Trizno, S.K., Lazarenko, S.N. and Fedorin, V.A., 2009. Sposob podzemnoy gazifikatsii svity krutykh I krutonaklonnykh ugol’nykh plastov. Pat. 2347070 RF MPK E21V 43/295.

Патент № 2347070 РФ МПК Е21В 43/295. Способ подземной газификации свиты крутых и крутонаклонных угольных пластов / С.К.Тризно, С.Н.Лазаренко, В.А.Федорин. – Опубл. 20.02.2009.

5. Falshtynskyi, V.S., Dychkovskyi, R.O. and Tabachenko, M.M., 2010. Sposib pidzemnoyi hazyfikatsiyi potuzhnykh plastiv tverdoho palyva. Ukraine. Pat. 50753 MPK E21V 43/00.

Патент № 50753 Україна, МПК Е21В 43/00. Спосіб підземної газифікації потужних пластів твердого палива / В.С.Фальштинський, Р.О.Дичковський, М.М.Табаченко та ін. – Опубл. 25.06.2010.

6. Sakhno, S., Kobylianskyi, B. and Sakhno, I., 2016. Destruction of rocks by the non-explosive depleting compounds during mining. Mining of Mineral Deposits, No. 10(1), pp. 25–30.

7. Rakishev, B., Seituly, K. and Kovrov, O., 2014. Physical modeling geomechanical stability of opencast slopes and internal overburden dumps. In: Legislation,Technology and Practice of Mine Land Reclamation, pp. 583–588.

8. Savostianov, О.V., 2016. Metody prohnozu heomekhanichnykh protsesiv dlia vyboru tekhnolohichnykh parametriv vidpratsiuvannia polohykh plastiv [Methods for forecasting geomechanical processes for selecting technological parameters for working flat seams]. Dnipropetrovsk: NMU.

Савостьянов О.В. Методи прогнозу геомеханічних процесів для вибору технологічних параметрів відпрацювання пологих пластів: монографія / Савостьянов О.В. – Днепропетровск: НГУ, 2016. – 246 с.

9. Falshtynskyi, V., 2013. Justification of the gasification channel length in underground gas generator. In: Annual Scientific-Technical Collection – Mining of Mineral Deposits 2013, CRC Press/Balkema, The Netherlands, pp. 125–132.

10. Postrzednik, S., Przybyla, G. and Zmudka, Z., 2015. Main conditions and effectiveness of gas fuel use for powering of dual fuel IC self-ignition engine. Transport Problems, Vol. 10, Iss. 3, pp. 99–111.

06_2016_Saik
2017-01-19  317.75 KB  767

• < Prev