Application of pulse-wave technology for oil well completion

User Rating:  / 0
PoorBest 

Authors:

Ya.M.Bazhaluk, Scientific and Production Company “INTEKS”, Ivano-Frankivsk, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

O.M.Karpash, Dr. Sc. (Tech.), Prof., Ivano-Frankivsk National Technical University of Oil and Gas, Ivano-Frankivsk, Ukraine, e-mail: gutako@gmail. com

O.I.Hutak, Cand. Sc. (Tech.), Ivano-Frankivsk National Technical University of Oil and Gas, Ivano-Frankivsk, Ukraine, e-mail: gutako@gmail. com

M.V.Khudin, Cand. Sc. (Tech.), Ivano-Frankivsk National Technical University of Oil and Gas, Ivano-Frankivsk, Ukraine, e-mail: gutako@gmail. com

Yu.D.Voloshyn, Ivano-Frankivsk National Technical University of Oil and Gas, Ivano-Frankivsk, Ukraine, e-mail: gutako@gmail. com

Abstract:

Purpose. Substantiation of the intensity values of elastic waves in the bottom-hole zone required to form a network of cracks in the formation as well as pilot verification of the results.

Methodology. Analytical and experimental research studies have been carried out on the clays sandstone with a tensile strength of 2.4 MPa, which has been treated by pressure pulses with duration of the leading front of up to 5 ms and amplitude of up to 6 MPa. The parameters of the research studies have been measured by standard equipment ATM-38.

Findings. The calculations confirm the possibility of creating variable pressure with amplitude of more than 1.2 MPa in the reservoir at a distance of 1 m from the downhole hydraulic generator. Industrial studies indicate the possibility of creating stresses in a near-wellbore zone which exceed the limit of the fatigue strength of the rock. This results in formation of additional cracks in the bottom-hole zone and, thus, more effective completion of the wells.

Originality. It is a new approach to the selection of the downhole generator parameters for creating a network of cracks in the formation on the basis of fatigue fracture rock.

Practical value. The results of the research can be used for testing the influence of cyclic stresses on the increasing quantity cracks in coal layers for degassing them and for creating new technologies of the oil and gas wells completion.

References/Список літератури

1. Bazhaluk, Y. M., Karpash, O. M., Klimishin, Ya. D., Hutak, A. I. and Khudin, N. V., 2012. Increased oil recovering by acting on the layers by elastic vibrations packages. Electronic scientific journal “Oil and gas business”, No. 3, рр. 185-198.

Увеличение отбора нефти путем воздействия на пласты пакетами упругих колебаний / Я. М. Бажалук, О. М. Карпаш, Я. Д. Климишин [и др.] // Электронный научный журнал „Нефтегазовое дело“ – 2012. – № 3. – С. 185-198.

2. Lukianov, J. V., Shuvalov, A. V. and Imamov, R. Z., 2007. Effect of reservoir conditions on the efficiency of vibroseismic impact on oil deposits. Oil Industry, No. 4, pp. 58-61.

Влияние пластовых условий на эффективность вибросейсмического воздействия в нефтяных залежах / Ю. В. Лукьянов, А. В. Шувалов, Р. З. Имамов [и др.] // Нефтяное хозяйство. – 2007. – № 4. – C. 5861.

3. Baiburova, M. M., 2008. The solution of strength and fracture of anisotropic materials and rocks problems. Doctor of Tehn. Science. Almetievsk State Oil Institute.

Байбурова М. М. Решение задач прочности и разрушения анизотропных материалов и горных пород: автореф. дис. на соискан. научн. степени докт. техн. наук / М. М. Байбурова – Альметьевск, 2008 – 12 с.

4. Exner, H., Freitag, R. and Lang, R., 2003. Hydraulic. Bases and components. Translated from German by V.K. Sveshnikov. Erbach, Publisher Bosch Rexroth AG, pp. 12-15.

Гидропривод. Основы и компоненты / Х. Экснер, Р. Фрейтаг, Р. Ланг [и др.] - Эрбах: Издатель Бош Рексрот, 2003 – C. 12-15.

5. Dyblenko, V. P., Kamalov, R. N., Shariffulin R. J. and Tufanov, I. A., 2000. Increasing productivity and resuscitation wells by using vibro-wave impact [Povyshenie produktivnosti i reanimatsiia skvazhyn s primeneniiem vibrovolnovogo vozdeistviia]. Moscow: Nedra.

Повышение продуктивности и реанимация скважин с применением виброволнового воздействия / В. П. Дыбленко, Р. Н. Камалов, Р. Я. Шариффулин, И. А. Туфанов – М.: Недра, 2000. – C. 197–198.

6. Latyshev, O. G. , Synbulatov, V. V. and Osipov, I. S., 2008. Kinetics of mass rocks saturation by solutions of surfactants in drilling holes and wells. News of higher educational institutions. Mining Journal, pp. 123–129.

Латышев О. Г. Кинетика насыщения породного массива растворами поверхностно-активных веществ при бурении шпуров и скважин / О. Г. Латышев, В. В. Сынбулатов, И. С. Осипов // Известия высших учебных заведений. Горный журнал. – 2008. – C. 123–129.

Files:
05_2016_Bazhaluk
Date 2016-11-15 Filesize 385.43 KB Download 773

Tags: oilelastic wavesfrequencywells completion

Newer news items:

Older news items: