Casing string centering in directional wells

User Rating:  / 1
PoorBest 

Authors:

Ya.S. Kotskulych, Dr. Sci. (Tech.), Professor, Ivano-Frankivsk National Technical University of Oil and Gas, Professor of the Department of Oil and Gas Well Drilling Engineering, Ivano-Frankivsk, Ukraine.

M.V. Seniushkovych, Cand. Sci. (Tech.), Associate Professor, Ivano-Frankivsk National Technical University of Oil and Gas, Senior Lecturer of the Department of Oil and Gas Well Drilling Engineering, Ivano-Frankivsk, Ukraine.

O.B. Martsynkiv, Cand. Sci. (Tech.), Associate Professor, Ivano-Frankivsk National Technical University of Oil and Gas, Senior Lecturer of the Department of Oil and Gas Well Drilling Engineering, Ivano-Frankivsk, Ukraine.

I.I. Vytvytskyi, Ivano-Frankivsk National Technical University of Oil and Gas, Assistant Lecturer of the Department of Oil and Gas Well Drilling Engineering, Ivano-Frankivsk, Ukraine.

Abstract:

Purpose. Improvement of preparation technology of the wellbore of directional wells for providing proper cementing of casing strings and forming of reliable casing.

Methodology. A model of the well with casing string equipped with centralizers was considered. The deflection of casing string that causes the formation of a gap between the string and the well wall was simulated. The following factors were taken into account: rigidity of casing pipes, deflection size, and distensible axial force applied to the casing string below the first centralizer, well axe zenith angle, density of fluids inside the casing string and in the annular space. Each of these factors determines the length of half-wave of deflection separately and taken together, and this should be described by analytical dependencies.

Findings. The appropriateness of making decisions about the size of the gap between the casing string and well wall, the length of its interval between the cross sections of centralizers’ placement for the given geological and technical conditions and casing quality requirements was reasoned.

The algorithm of determining the length of casing string half-wave of deflection depending on the factors considered has been developed. The importance of each factor was determined based on the results of the multifactor analysis.

The necessity of taking into account the rigidity of pipes of the casing string when determining the length of the half-wave, especially for small values of zenith angle, was reasoned.

The magnitude of the force influencing single centralizer installed on the casing string in the directional well has been determined.

Originality. The dependencies of the length of half-wave of deflection of a casing string on the factors influencing the reliability of casing of directional wells have been determined.

Practical value. The improved methods may be used for optimization of quantity of centering devices on the casing string and estimation of their working capacity, which will prevent problems that can occur when running casing string and give the opportunity to prepare the wellbore for cementing operations.

References:

1. РД 39-7/1-0001-97. Инструкция по расчету обсадных колонн для нефтяных и газовых скважин. – М., 1997. – 194с.

RD 39-7/1-0001-97 (1997), Istruktsyia po raschetu obsadnykh kolonn dlya neftyanykh i gazovykh skvazhyn [Manual on Casing Design for Oil and Gas Wells], Moscow, Russia.

2. Коцкулич Я.С. Закінчування свердловин / Коцкулич Я.С., Тищенко О.В. – К.: Інтерпрес ЛТД, 2009. – 366 с.

Kotskulych, Ya.S. and Tyshchenko, O.V. (2009), Zakinchuvannia sverdlovyn [Well Completion], Interpres LTD, Kyiv, Ukraine.

3. Мислюк М.А. Буріння свердловин: Довідник у 5 т. Т.4.: Завершення свердловин / Мислюк М.А., Рибчич І.Й. ￿ К.: Інтерпрес ЛТД, 2012. 608 с.

Mysliuk, M.A. and Rybchych, I.I. (2012), Burinnia sverdlovyn: Dovidnyk u 5 tomakh. Tom 4. Zavershennia sverdlovyn [Well Drilling: Manual, vol.4, Well Completion], Interpres LTD, Kyiv, Ukraine.

4. РД 39-00147001-767-2000. Инструкция по креплению нефтяных и газовых скважин. Открытое акционерное общество "Газпром"; 08. 2000, 141с.

RD 39-00147001-767-2000 (2000), Instruktsyya po krepleniyu neftyanykh i gazovykh skvazhyn [Manual on Oil and Gas Well Cementing], Open Joint Stock CompanyGazprom”, Russia.

5. Басарыгин Ю.М. Теория и практика предупреждения осложнений и ремонта скважин при их строительстве и эксплуатации / Басарыгин Ю.М., Будников В.Ф., Булатов А.И. – М.: ООО "Недра-Бизнесцентр", 2001. – Т.3. – 399с.

Basarygin, Yu.M., Budnikov, V.F. and Bulatov, A.I. (2001), Teoriya i praktika preduprezhdeniya oslozhneniy remonta skvazhyn pri ikh stroitelstve ekspluatatsyi [Theory and Practice of Complications and Well Workover During their Construction and Exploitation], Vol.3., Nedra-Businesscentre JSC, Moscow, Russia.

6. Александров А.В. Сопротивление материалов / Александров А. В., Потапов В. Д., Державин Б. П. – М.: Высшая школа, 2003. – 560с.

Aleksandrov, A.V., Potapov, V.D. and Derzhavin, B.P. (2003), Soprotivleniye materialov [Strength of Materials], Vysshaya shkola, Moscow, Russia, ISBN: 5-06-003732-0.

7. Феодосьев В.И. Сопротивление материалов: 10-е издание / Феодосьев В.И. – М.: МГТУ им. Баумана, 2000. – 592с.

Feodosiev, V.I. (2000), Soprotivleniye materialov [Strength of Materials], MSTU named after Bauman, Moscow, Russia.

8. ISO 10427 – 2: 2004, Petroleum and Natural Gas Industries Equipment for Well Cementing Part 2: Centralizer Placement and Stop – Collar Testing.

ISO 10427 - 2: 2004, Нефтяная и газовая отрасли - Оборудование для цементирования скважин - Часть 2: Размещение центратора и проведение испытаний.

9. Гриманюк В.И. Исследование трещиностойкости армированного тампонажного камня для крепления нефтяных и газовых скважин/ В.И. Гриманюк// Научный вестник Национального горного университета. 2014. – № 1(139). С. 5–11.

 

Hrymaniuk, V.I. (2014), “Investigation reinforced cement stone cracking resistance for carting oil and gas wells”, Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, no. 1(139), pp. 5–11.

Files:
2015_03_kotskulych
Date 2015-10-29 Filesize 544.23 KB Download 1017

Visitors

6238320
Today
This Month
All days
2774
64997
6238320

Guest Book

If you have questions, comments or suggestions, you can write them in our "Guest Book"

Registration data

ISSN (print) 2071-2227,
ISSN (online) 2223-2362.
Journal was registered by Ministry of Justice of Ukraine.
Registration number КВ No.17742-6592PR dated April 27, 2011.

Contacts

D.Yavornytskyi ave.,19, pavilion 3, room 24-а, Dnipro, 49005
Tel.: +38 (056) 746 32 79.
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
You are here: Home Archive by field of science Mining Casing string centering in directional wells