The development of the simple modified control law for the compensation of the cogging torque in the synchronous motor with permanent magnets (Entwurf einer einfachen und modifizierten rastmomentkompensation für die permanenterregte synchronmaschine)

• 

User Rating:  / 0

PoorBest 

Details

Category: Electrical engineering

Last Updated on Thursday, 19 January 2017 20:11

Published on Thursday, 19 January 2017 20:11

Hits: 3467

Authors:

O.Beshta, Corresponding Member of the National Academy of Sciences of Ukraine, Dr. Sci. (Tech.), Prof., State Higher Educational Institution “National Mining University”, Dnipro, Ukraine,e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.

E.Nolle, Dr.-Ing., Prof., Hochschule Esslingen(University of Applied Sciences), Goeppingen, Federal Republic of Germany, e-mail:This email address is being protected from spambots. You need JavaScript enabled to view it.

M.Kuvaiev, State Higher Educational Institution “National Mining University”, Dnipro, Ukraine,e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.

(O.Beschta, Korrespondierendes Mitglied der Nationalakademie der Wissenschaften der Ukraine, Dr. Sc., Prof., Nationale Bergbauuniversität, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.

E.Nolle, Dr.-Ing., Prof., Hochschule Esslingen, Goeppingen, Bundesrepublik Deutschland, e-mail:This email address is being protected from spambots. You need JavaScript enabled to view it.

M.Kuvaiev, Nationale Bergbauuniversität, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.)

Abstract:

Purpose. The goal is to synthesize a simple way to suppress the cogging torque in the transverse flux motor (TFM), which is a special type of the synchronous motor with permanent magnet. This TFM is meant to be used in direct drive of the C-Press with ServoDirekt-technology.

Methodology. To justify the opportunity of the cogging torque compensation via a special harmonic component of stator current.

Findings. The simple modified way of the cogging torque compensation for transverse flux motor and the synchronous motor with permanent magnet has been proposed, which minimizes ripples of the torque in broad spectrum of the operation speeds.

Originality. The presented research shows that compensation of the cogging torque depends on rotation speed of the motor. Therefore the phase delay and the amplitude ratio factor between current reference and the reproduced electromagnetic torque must be taken into account.

Practical value. Using this control law in drive with TFM or another synchronous motor with permanent magnet it is possible to improve the quality of the forming technology.

References/Список літератури

1. Nolle, E., Beshta, O. and Kuvaiev, M., 2015. Compensation of the cogging torque by means of control system for transverse flux motor. In: Power Engineering Control and Information Technologies in Geotechnical Systems. CRC Press/Balkema, Taylor & Francis Group, Leiden, The Netherlands, annual publication, pp. 21–25.

2. Bakutin, A., 2015. The electromechanical system of the turning machine tool. In: Power Engineering Control and Information Technologies in Geotechnical Systems. CRC Press/Balkema, Taylor & Francis Group, Leiden, The Netherlands, annual publication, pp. 201–210.

3. Schröder, D., 2009. Elektrische Antriebe – Regelung von Antriebsystemen. 3rd ed. Berlin; Heidelberg: Springer. Schroeder, D., Electric drives – Control of drive systems. Edition 3, Berlin, Heidelberg, Springer, 2009.

4. Bessekerskij, V. and Popov, E., 2003. Teoriia avtomaticheskogo upravleniia [Theory of automatic control]. Saint Petersburg: Professija.

Бессекерский В.А. Теория систем автоматического управления / Бессекерский В.А., Попов Е.П. – СПб.: „Профессия“, 2003. – 752 с.

06_2016_Beschta
2017-01-19  1.04 MB  730